Diethylene Glycol Monobutyl Ether

Send Inquiry
Diethylene Glycol Monobutyl Ether
Details
Diethylene Glycol Monobutyl Ether (DEGBE / Butyl Carbitol, CAS 112-34-5) — highest-boiling commercial butyl glycol ether (BP 227–235 °C). Dual regulatory advantage: not classified Repr. 1B/2 (EU CLP) AND not US EPA HAP listed — the only butyl glycol ether meeting both EU and US market compliance simultaneously. Non-DG transport. Potential VOC exemption. Precursor to DEGBEA (CAS 124-17-4). Purity ≥99.0%, COA, SDS, REACH. Contact us — 24-hour response.
Category
Butyl Glycol Ethers
Share to
Description

What Is Diethylene Glycol Monobutyl Ether (DEGBE / Butyl Carbitol)?

✓ Dual Regulatory Advantage - Not Repr. 1B (EU) & Not HAP Listed (US) - Highest-Boiling Butyl Glycol Ether
  • Not classified as Repr. 1B/2 under EU CLP - no REACH Annex XVII consumer restriction; eligible as co-formulant in EU crop protection products under Regulation (EC) No 1107/2009; not SVHC listed. Unlike EGME (Repr. 1B) and EGEE (Repr. 1B).
  • Not listed as US EPA HAP (Hazardous Air Pollutant under US Clean Air Act Section 112(b)) - unlike EGBE (CAS 111-76-2, HAP listed), DEGBE carries no US air emission monitoring or reporting obligations, making it the preferred butyl glycol ether for US cleaning product and coating manufacturers subject to HAP facility compliance.
  • Boiling point 227–235 °C - highest boiling point among commercial butyl and propyl glycol ether solvents; near-negligible ambient vapor pressure; flash point ~78 °C (above GHS Class 3 flammable liquid threshold of 60 °C); potential VOC exemption in EU Paints Directive and SCAQMD Rule 102.

Diethylene Glycol Monobutyl Ether (DEGBE, CAS 112-34-5) - commercially known as Butyl Carbitol or 2-(2-Butoxyethoxy)ethanol (IUPAC) - is produced by monoetherification of diethylene glycol with n-butanol under catalytic conditions. Its molecular formula is C₈H₁₈O₃ (MW 162.23 g/mol). DEGBE is the diethylene glycol backbone homolog of EGBE (CAS 111-76-2, Butyl Cellosolve) - same n-butyl end-group, but with an extended diethylene glycol chain that raises the boiling point to 227–235 °C and reduces the vapor pressure to near-negligible levels. It is the butyl-terminated member of the Carbitol series, alongside DEGMME (methyl), DEGEE (Carbitol, ethyl), and DEGPE (propyl).

The n-butyl end-group gives DEGBE the highest KB value in the diethylene glycol ether series and the strongest non-polar solvency for oils, greases, waxes, and hydrophobic resins, while the diethylene glycol backbone maintains full water miscibility and strong amphiphilic coupling power. DEGBE's ultra-high boiling point makes it the benchmark coalescing agent in waterborne architectural and industrial coatings - remaining in the film throughout the entire coalescence window to achieve full polymer particle fusion, especially critical in cold-weather painting applications below 10 °C. It is fully miscible with water, alcohols, ketones, esters, and aromatic/aliphatic hydrocarbons.

DEGBE's most commercially strategic regulatory property is its dual non-Repr.1B (EU) + non-HAP (US) status - making it the preferred butyl glycol ether for formulators simultaneously targeting EU and US regulated markets in household/institutional cleaning and architectural coatings. DEGBE is also the precursor to Butyl Carbitol Acetate (DEGBEA, CAS 124-17-4) - one of the slowest-evaporating conventional coating solvents commercially available, used as a premium retarder in automotive refinishing and high-performance industrial coatings. Sinolook supplies both DEGBE and DEGBEA. Purity ≥99.0%, ISO 9001 and ISO 14001 certified, full COA, GHS SDS, and REACH documentation. Non-DG / non-Class 3 transport.

Chemical Identity & Key Parameters
2-(2-Butoxyethoxy)ethanol
CAS Number
112-34-5
EC Number
203-961-6
Formula
C₈H₁₈O₃
Mol. Weight
162.23 g/mol
Purity
≥99.0%
Boiling Point
227–235 °C ★
Flash Point
~78 °C (cc)
Transport
Non-DG
Trade Name
Butyl Carbitol
Repro. Tox.
Not classified ✓

Key Performance Advantages of DEGBE / Butyl Carbitol

Six properties define DEGBE's market leadership - it is the only butyl glycol ether that combines the highest boiling point in its series (227–235 °C), a non-HAP US regulatory profile, a non-Repr.1B EU profile, potential VOC exemption, and non-DG transport, making it the benchmark coalescing solvent for premium waterborne coatings and the preferred coupling agent for US- and EU-regulated cleaning formulations.

🌡️ Highest Boiling Point - 227–235 °C - Maximum Coalescence Open Time

DEGBE's boiling point of 227–235 °C is the highest among commercial butyl and propyl glycol ether solvents - significantly above EGBE (168–173 °C) and DEGPE (208–218 °C). This ultra-high boiling point is DEGBE's defining performance property in waterborne coatings: it remains in the coating film throughout the entire coalescence window, temporarily reducing polymer Tg and enabling complete polymer particle fusion even in cold-weather application conditions (below 10 °C) where faster-evaporating coalescing agents flash off before full film formation occurs. Extended coalescence prevents cracking, chalking, and adhesion failure in architectural paints applied in spring and autumn painting seasons. The near-negligible ambient vapor pressure also means virtually zero evaporative loss during storage, blending, and application - critical for high-value formulation applications.

🇺🇸 Not US HAP Listed - Preferred for US Manufacturing Facilities

DEGBE is not listed as a Hazardous Air Pollutant (HAP) under the US Clean Air Act Section 112(b) - a critical regulatory advantage over its shorter-chain homolog EGBE (CAS 111-76-2, HAP listed). EGBE's HAP listing imposes air emission monitoring, reporting, and control requirements on large US industrial manufacturing facilities (qualifying Major Sources under 40 CFR Part 63), creating compliance overhead that many US cleaning product, coating, and industrial chemical manufacturers seek to avoid. By substituting DEGBE for EGBE in formulations where performance is comparable, US facilities can eliminate EGBE-attributable HAP emission obligations, simplify Title V permit compliance, and reduce the cost of facility-level air quality reporting. DEGBE's slower evaporation rate typically allows its use at lower loading levels than EGBE to achieve equivalent soil dissolution and coupling performance, further reducing absolute emissions.

🇪🇺 Non-Repr.1B + EU 1107/2009 Eligible - Dual-Market Compliant

DEGBE is not classified as Repr. 1B/2 under EU CLP Regulation - carrying no reproductive toxicant hazard designation and no REACH Annex XVII consumer product restriction; fully eligible as co-formulant in EU-authorized plant protection products under Regulation (EC) No 1107/2009. Unlike EGME (Repr. 1B, Annex XVII restricted) and EGEE (Repr. 1B, Annex XVII restricted), DEGBE can be used without CMR risk management in EU consumer products, professional coatings, cleaning products, and agrochemical formulations. The combination of non-Repr.1B (EU) + non-HAP (US) makes DEGBE the uniquely dual-market-compliant butyl glycol ether - the only choice when products must meet both EU CLP and US Clean Air Act facility compliance simultaneously. REACH registered (EC 203-961-6); not SVHC listed; not Prop 65 listed.

🔥 Combustible - Not Flammable Liquid (FP ~78 °C)

DEGBE's flash point of ~78 °C exceeds the GHS Class 3 flammable liquid threshold (60 °C), classifying it as a combustible liquid rather than a flammable liquid - significantly simplifying storage area requirements compared to EGBE (FP ~61 °C, Class 3 flammable) and EGPE (FP ~52 °C, Class 3 flammable). No DG transport classification required: standard non-DG sea, air, and road freight at lower logistics cost than Class 3 DG solvents. No explosion-proof electrical equipment requirement in storage areas at normal ambient temperatures. No ATEX zone compliance needed in warehouse environments. Reduced fire insurance premiums. In hot-tank industrial cleaning baths (60–90 °C), DEGBE remains well below its flash point at typical bath operating temperatures, enabling non-flammable heated cleaning operation.

📋 Potential VOC Exemption - Low-VOC Formulation Enabler

DEGBE's boiling point (~230 °C) and near-negligible vapor pressure at ambient temperature place it at or near VOC exemption thresholds in several key regulatory frameworks. Under the EU Paints Directive (2004/42/EC) and SCAQMD Rule 102 in California, high-boiling solvents above defined boiling point thresholds may qualify for reduced or zero VOC contribution to product calculations - potentially allowing higher DEGBE loading in coating and cleaning formulations without exceeding regulated VOC limits. This is a decisive formulation advantage as VOC limits continue to tighten globally. Buyers should verify DEGBE's treatment under the specific VOC regulations applicable to their product category and target market; Sinolook provides boiling point and vapor pressure data to support customers' regulatory VOC submissions.

⚗️ DEGBEA Precursor - Slowest-Evaporating Coating Solvent System

DEGBE is the direct precursor to Butyl Carbitol Acetate (DEGBEA, Diethylene Glycol Monobutyl Ether Acetate, CAS 124-17-4) - esterification with acetic acid yields one of the slowest-evaporating conventional coating solvents commercially available (BP ~245 °C, very low vapor pressure). DEGBEA is the premium retarder in high-gloss automotive refinishing lacquers, two-component polyurethane industrial coatings, and high-performance architectural finishes requiring maximum flow time and gloss. DEGBE and DEGBEA are routinely used together in formulations to engineer the extended-end of the evaporation profile across the drying cycle. Sinolook supplies DEGBEA as a companion product - combined DEGBE + DEGBEA quotation available. Both products can be co-shipped in the same non-DG consolidated container.

📌 EGBE vs DEGBE vs DEGPE - Butyl & Propyl Glycol Ether Series Comparison

Property EGBE (CAS 111-76-2) DEGPE (CAS 6881-94-3) DEGBE (CAS 112-34-5)
Common Name Butyl Cellosolve Propyl Carbitol Butyl Carbitol ★
Boiling Point 168–173 °C 208–218 °C 227–235 °C ★ Highest
Flash Point ~61 °C (Class 3 Flammable) ~96 °C (Non-flammable) ✓ ~78 °C (Combustible) ✓
DG Transport UN 2369 Class 3 PG III ⚠ Non-DG ✓ Non-DG ✓ ★
EU Repr. Classification Not classified ✓ Not classified ✓ Not classified ✓ ★
US HAP Status HAP listed ⚠ (large emitters) Not listed ✓ Not listed ✓ ★
Vapor Pressure Low Low Very Low (near-negligible) ★
Primary Strength Fastest evaporation, cleaning actives Non-flammable + non-Repr.1B Highest BP + non-HAP + non-Repr.1B: dual EU/US market ★

DEGBE / Butyl Carbitol Uses & Applications

DEGBE (CAS 112-34-5) is the primary choice when maximum open time in coatings and a dual-market-clean regulatory profile (both non-Repr.1B EU and non-HAP US) are required simultaneously - spanning seven major industrial sectors from premium waterborne architectural coatings to EU-compliant agrochemical co-formulation.

🎨

Waterborne Paints, Coatings & Architectural Finishes

Benchmark coalescing agent in waterborne latex, acrylic, and alkyd coating systems globally - temporarily reducing polymer Tg to enable complete particle fusion throughout the full coalescence window. Critical in cold-weather architectural painting (below 10 °C) where DEGBE's ultra-high boiling point sustains plasticization long after faster-evaporating co-solvents have departed the film. Prevents cracking, chalking, and poor adhesion in low-temperature application. In premium high-gloss exterior and interior architectural finishes, slow evaporation extends wet edge and reduces brush drag on large surface areas. In industrial maintenance coatings (alkyd enamel, epoxy-polyamide, two-component polyurethane) on steel structures, bridges, and industrial equipment, strong solvency displaces surface moisture from marginally prepared substrates and improves adhesion and coating durability. Non-DG transport and potential VOC exemption are formulation bonuses.

Benchmark Coalescing Agent Cold-Weather Painting
🚗

Automotive OEM, Refinishing & High-Performance Coatings

Key retarder in waterborne automotive OEM basecoats - controls flash-off kinetics between basecoat and clearcoat application to allow metallic and effect pigment flakes to orient horizontally in the film for maximum specular gloss and flop. In two-component waterborne polyurethane clearcoats, controls pot life and flow behavior during the open time window after resin-hardener mixing, reduces application viscosity without phase separation. In automotive refinish body shop systems, slow evaporation achieves smooth, defect-free surfaces matching OEM finish quality. In high-solid industrial maintenance coatings and solvent-borne systems, DEGBE's strong solvency for alkyd and epoxy resins, combined with its water-displacement capability, delivers robust film performance over marginally prepared metal. DEGBEA (Butyl Carbitol Acetate, CAS 124-17-4) extends this capability as an ultra-slow retarder companion solvent.

Basecoat Retarder Pigment Orientation
🧹

Household & Institutional Cleaning - Non-HAP US Grade

Slow-evaporating coupling agent and grease-cutting active in hard surface cleaners, tile and grout cleaners, bathroom disinfectant cleaners, and floor care products. Longer contact time with soils on vertical surfaces vs. EGBE - particularly beneficial in bathroom and kitchen cleaning where penetration into textured or grout surfaces before wiping is important. Very low vapor pressure produces a lower odor profile than EGBE - formulation advantage in low-odor or 'fresh scent' positioned products. Critical US regulatory advantage: non-HAP status eliminates EGBE-attributable air emission reporting obligations for US cleaning product manufacturers subject to Clean Air Act major source thresholds - the primary reason many US formulators have transitioned from EGBE to DEGBE in hard surface cleaning concentrates. Full water miscibility, broad compatibility with alkaline builders, surfactants, and chelating agents.

Non-HAP US ✓ Low-Odor Profile
⚙️

Industrial Cleaning, Hot-Tank Degreasing & Precision Metal Cleaning

Preferred process solvent in hot-tank immersion cleaning baths (60–100 °C) - DEGBE's high boiling point ensures it remains in the liquid phase at all standard bath operating temperatures, maintaining consistent dissolving action on hydraulic oils, compressor lubricants, drawing compounds, and polymeric residues throughout the cleaning cycle without the evaporative concentration shifts that affect lower-boiling solvents. Flash point ~78 °C stays comfortably above typical hot-tank operating temperatures - non-flammable operation in heated cleaning environments. Compatible with alkaline builders, surfactants, chelating agents, and corrosion inhibitors common in industrial cleaning formulations. In precision electronics manufacturing, DEGBE is used in flux removal concentrates and post-solder cleaning systems - effective solvency for rosin-type and no-clean flux residues with broad PCB substrate material compatibility.

Hot-Tank Stable PCB Flux Removal
🌿

Agrochemical Formulations - EU 1107/2009 Non-CMR Co-Formulant

Co-solvent and emulsifier aid in EC (emulsifiable concentrate), SL (soluble liquid), and ME (microemulsion) formulations of herbicides, fungicides, and insecticides - strong solvency for highly lipophilic active ingredients (log P above 4) combined with effective emulsification behavior upon dilution into spray water. Not classified CMR; not restricted as co-formulant under EU Regulation (EC) No 1107/2009 - unlike EGME and EGEE which face co-formulant restrictions in EU-registered crop protection products due to Repr. 1B classification. Sinolook provides REACH registration confirmation (EC 203-961-6), SDS, and impurity profile data to support agrochemical customers' co-formulant authorization submissions to national competent authorities. Non-flammable handling characteristics improve safety in agrochemical blending facilities.

1107/2009 Eligible Non-CMR Co-Formulant
🧴

Personal Care, Cosmetics & Topical Pharmaceuticals

Solubilizer, humectant, and coupling agent in premium skin care, hair care, and body care products - higher MW vs. EGBE and DEGEE translates into stronger humectant performance and richer, more substantive skin feel suited to intensive moisturizers, hair masks, and body butters in premium personal care segments. Dissolves lipophilic cosmetic actives (retinoids, ceramides, botanical extracts) in aqueous formulation matrices while maintaining single-phase clarity. In topical pharmaceutical formulations, low toxicity profile, skin compatibility, and moderate penetration-enhancing activity (disrupts stratum corneum ordered lipid bilayer) support its consideration as a pharmaceutical excipient in topical gels, creams, and transdermal drug delivery systems. Can increase apparent solubility of lipophilic APIs in aqueous topical matrices and improve flux across the skin barrier. EU cosmetics regulatory compliant; non-Repr.1B enables use in consumer-facing products.

Humectant Penetration Enhancer
⚗️

Chemical Synthesis & DEGBEA Intermediate

High-boiling reaction solvent in specialty ester, surfactant, and polymer synthesis - BP 227–235 °C enables elevated-temperature synthesis without pressure vessels. Direct chemical precursor to Butyl Carbitol Acetate (DEGBEA, CAS 124-17-4), one of the slowest-evaporating conventional coating solvents commercially available (BP ~245 °C), used as a premium retarder in high-gloss automotive refinishing lacquers and two-component polyurethane systems. Sinolook supplies DEGBEA as a companion product - combined DEGBE + DEGBEA quotation and consolidated non-DG shipment available. Also used as carrier solvent in metalworking fluids, hydraulic systems, and high-temperature process applications requiring non-flammable, water-miscible, low-volatility solvent chemistry.

DEGBEA Precursor High-Temp Reaction Solvent

Technical Specifications & COA

Sinolook's Diethylene Glycol Monobutyl Ether is manufactured under strict quality control with every production batch tested against the parameters below. A full Certificate of Analysis (COA), DEGBE SDS / MSDS (GHS-compliant, multi-language), and Technical Data Sheet (TDS) are issued with every shipment. Non-DG packaging - standard sea, air, and road freight. Higher-purity grade (≥99.5%) available on request.

DEGBE (Butyl Carbitol / 2-(2-Butoxyethoxy)ethanol, CAS 112-34-5) - Quality Specifications & Typical COA

Parameter Specification Typical COA Result
Appearance Clear, colorless liquid, free of suspended matter Clear colorless liquid
Purity (GC), wt% ≥99.0% 99.1 – 99.5%
Water Content (Karl Fischer), wt% ≤0.15% 0.05 – 0.10%
Density (20 °C), g/cm³ 0.949 – 0.959 0.952 – 0.956
Boiling Point, °C 227.0 – 235.0 °C (1 atm) 228 – 233 °C
Flash Point (closed cup), °C ≥75 °C ~78 °C
Refractive Index (20 °C, n20/D) 1.431 – 1.434 1.4315 – 1.4335
Color (Pt-Co / APHA) ≤15 ≤10
Viscosity (25 °C), mPa·s ~5.5 5.0 – 6.0
Acidity (as acetic acid), wt% ≤0.005% <0.002%
Residue on Evaporation, wt% ≤0.01% <0.005%

Higher-Purity Grade (≥99.5%): Available for specialty coatings, pharmaceutical, and advanced cosmetics applications. Packaging: 200 kg iron drums; 1,000 kg IBC tanks; bulk ISO tank containers. Transport: Non-DG (combustible liquid, FP ~78 °C - above Class 3 threshold); standard sea, air, and road freight; lower logistics cost vs. EGBE (Class 3 DG). Companion product DEGBEA (Butyl Carbitol Acetate, CAS 124-17-4) available - combined DEGBE + DEGBEA quotation and non-DG consolidated shipment on request.

DEGBE SDS, Safety & Regulatory Classification

DEGBE has the most complete dual-market regulatory profile in the butyl glycol ether class: not a reproductive toxicant (no Repr. 1B/2 EU CLP), not US EPA HAP listed (unlike EGBE), combustible but not flammable (FP ~78 °C, non-DG transport), REACH registered (EC 203-961-6), not SVHC listed, not Prop 65 listed. DEGBE SDS / MSDS GHS-compliant, available in English, German, French, Spanish, and Chinese.

Non-Repr. ✓
Not Repr. 1B/2
Non-HAP ✓
US Clean Air Act
Non-DG ✓
Standard freight
No Annex XVII ✓
EU consumer-safe
VOC Exempt* ✓
Verify per jurisdiction
Safety / Regulatory Parameter Value / Notes
GHS Classification Eye Irrit. 2 (H319); Skin Irrit. 2 (H315) - not classified as flammable liquid or reproductive toxicant
GHS Signal Word WARNING
Flash Point & Transport ~78 °C (cc) - combustible liquid; not classified as GHS Class 3 flammable liquid; no UN/DG classification required for standard transport; non-DG sea, air, and road freight
Reproductive Toxicity Not classified - no Repr. 1B/2 designation under EU CLP; no REACH Annex XVII consumer product restriction; no CMR hazard designation
US HAP Status Not listed as HAP under US Clean Air Act Section 112(b) - key advantage over EGBE (CAS 111-76-2, HAP listed); no US air emission monitoring/reporting obligations attributable to DEGBE
EU Agrochemical Status Not CMR, PBT, or vPvB; fully eligible as co-formulant in EU-authorized plant protection products under Regulation (EC) No 1107/2009; supporting documentation available for national competent authority submissions
VOC Status Boiling point ~230 °C and near-negligible vapor pressure place DEGBE at or near VOC exemption thresholds under EU Paints Directive (2004/42/EC) and SCAQMD Rule 102 in California; buyers should verify applicable regulatory treatment for their product category; Sinolook provides BP and vapor pressure data for regulatory submissions
REACH / SVHC Status REACH registered (EC 203-961-6); Not SVHC listed; No Annex XVII restriction; REACH compliance letter available on request
US / California Not listed under California Prop 65; TSCA compliance confirmation available; standard OSHA HazCom applies
PPE Recommended Safety glasses; nitrile or neoprene gloves; avoid prolonged skin/eye contact; adequate general ventilation; low vapor pressure minimizes vapor generation at ambient temperature; no special respiratory protection required under normal handling
Storage Cool, dry, well-ventilated area; 5–40 °C; sealed containers; combustible liquid - keep from open flames and strong heat sources; no explosion-proof requirements at ambient temperature; shelf life 24 months
Request SDS / COA / TDS sales@sinolookchem.com or WhatsApp +86 134 0071 5622 - issued within 24 hours

DEGBE Price, Packaging & B2B Supply

Diethylene glycol monobutyl ether price depends on grade, volume, packaging, and Incoterms. As a direct manufacturer with dedicated DEGBE production capacity, Sinolook offers transparent volume-tiered pricing with no distributor markups. Non-DG transport classification reduces freight cost vs. EGBE (Class 3 DG). Request a customized DEGBE / Butyl Carbitol price quote - 24-hour response guaranteed.

Order Volume Packaging Included Services
0.5 – 5 kg (Sample) Sample bottle / small drum (non-DG) COA, DEGBE SDS/MSDS, TDS; nominal charge refundable against first commercial order
1 MT – 20 MT (Regular) 200 kg iron drums / 1,000 kg IBC tanks (non-DG) Volume discount; non-DG standard freight; dedicated account manager; REACH, HAP, and VOC regulatory documentation
20 MT+ (Bulk / Contract) ISO tank containers (non-DG bulk) Best DEGBE price; fixed-price annual supply contract; reserved production capacity; SGS/Intertek/BV inspection available

📦 MOQ

1 MT standard (≥99.0%). High-purity ≥99.5% on request. Samples 0.5–5 kg refundable. 200 kg standard drums.

🚢 Delivery Terms

EXW, FOB, CFR, CIF, DAP, DDP. Ex-Shanghai, Tianjin, Qingdao, Guangzhou, Ningbo. Non-DG freight - lower cost vs. EGBE Class 3 DG.

⏱ Lead Time

Price quote within 24 hours. Production and export: 10–15 business days. Expedited available. Inventory buffers for contract customers. Shelf life 24 months.

🔍 Inspection

SGS, Intertek, or Bureau Veritas at buyer's cost. Notify at order placement. Pre-shipment COA issued for all orders.

  • ✓ ISO 9001 & ISO 14001 certified - every batch QC tested for GC purity, Karl Fischer, density, refractive index, color, flash point, and viscosity; high-volume dedicated DEGBE production lines
  • ✓ Full export documentation: COA, SDS/MSDS (multi-language), TDS, Certificate of Origin, packing list, commercial invoice, bill of lading (non-DG - no DG declaration required)
  • ✓ EU REACH compliance letter (EC 203-961-6), SVHC declaration, non-Repr.1B / non-CMR confirmation, EU 1107/2009 co-formulant eligibility letter available on request
  • ✓ US regulatory documentation: TSCA confirmation, Prop 65 statement, US HAP non-listing confirmation for facility compliance teams transitioning from EGBE to DEGBE
  • ✓ VOC exemption data: boiling point and vapor pressure documentation for regulatory submissions under EU Paints Directive (2004/42/EC), SCAQMD Rule 102, and other VOC frameworks
  • ✓ Companion product DEGBEA (Butyl Carbitol Acetate, CAS 124-17-4) available - combined DEGBE + DEGBEA quotation and consolidated non-DG shipment on request

Frequently Asked Questions About DEGBE / Butyl Carbitol

Technical and commercial questions about Diethylene Glycol Monobutyl Ether / Butyl Carbitol (CAS 112-34-5) from B2B buyers in coatings, cleaning, agrochemicals, and industrial applications.

What is Diethylene Glycol Monobutyl Ether (DEGBE / Butyl Carbitol) and what is it used for?

DEGBE (CAS 112-34-5), commercially known as Butyl Carbitol or 2-(2-Butoxyethoxy)ethanol, is a high-boiling (227–235 °C), combustible (FP ~78 °C, non-DG), non-Repr.1B, non-HAP diethylene glycol butyl ether - the highest-boiling commercial butyl glycol ether solvent. Primary uses: benchmark coalescing agent in waterborne architectural, automotive OEM, and industrial maintenance coating systems (primary market - maximum open time, cold-weather coalescence); retarder and flow additive in automotive refinishing and 2K polyurethane coatings for metallic pigment orientation and gloss; non-HAP coupling agent in US-market household and institutional cleaning products (hard surface cleaners, floor strippers); hot-tank industrial degreasing solvent stable at 60–100 °C bath temperatures; EU 1107/2009 eligible co-formulant in EC/SL/ME agrochemical formulations; pharmaceutical and personal care humectant and penetration enhancer; and DEGBEA precursor for ultra-slow automotive refinishing solvent systems.

What are the synonyms and CAS number for DEGBE / Butyl Carbitol?

The DEGBE CAS number is 112-34-5 (EC 203-961-6). Synonyms include Butyl Carbitol (most widely used commercial name, originally a Union Carbide trade name), 2-(2-Butoxyethoxy)ethanol (IUPAC), Diglycol Monobutyl Ether, Diethylene Glycol n-Butyl Ether, and Butyl Digol. DGMBE is also used by some suppliers. Always specify CAS 112-34-5 to distinguish from EGBE (CAS 111-76-2, Butyl Cellosolve - E-series, shorter chain, HAP listed), DEGBEA (CAS 124-17-4, Butyl Carbitol Acetate - the acetate ester), or DEGPE (CAS 6881-94-3, Propyl Carbitol - propyl-terminated Carbitol series).

Why is DEGBE preferred over EGBE in some coating and cleaning formulations?

DEGBE's much higher boiling point (227–235 °C vs 168–173 °C) means it remains in the coating film as a plasticizing coalescing agent far longer than EGBE - critical for complete film formation in cold-weather architectural painting and for maximum metallic pigment orientation in automotive OEM basecoats. In cleaning products, DEGBE's slower evaporation provides longer soil contact time on vertical surfaces and a lower-odor profile than EGBE. The most strategically important difference for US formulators is regulatory: EGBE is listed as a US EPA HAP, imposing air emission monitoring and reporting on large manufacturing facilities; DEGBE carries no such listing, allowing US cleaning product and coating manufacturers to simplify or eliminate HAP emission compliance obligations. For EU market, both are non-Repr.1B - no regulatory differentiation on this dimension. EGBE remains preferred where faster drying is required or cost is more tightly constrained.

What is Butyl Carbitol Acetate (DEGBEA) and does Sinolook supply it?

Butyl Carbitol Acetate (DEGBEA, Diethylene Glycol Monobutyl Ether Acetate, CAS 124-17-4) is produced by esterification of DEGBE with acetic acid. With a boiling point of ~245 °C and near-zero vapor pressure, DEGBEA is one of the slowest-evaporating conventional coating solvents commercially available - used as a premium retarder in high-gloss automotive refinishing lacquers, two-component polyurethane systems, and high-performance architectural finishes requiring maximum flow time, leveling, and gloss. DEGBE and DEGBEA are routinely used together in formulations to engineer the slowest-evaporating portion of the drying profile. Sinolook supplies DEGBEA as a companion product to DEGBE - contact sales@sinolookchem.com for specifications, pricing, and combined non-DG consolidated shipment options.

How does DEGBE's VOC status affect coating and cleaning product formulation?

DEGBE's very high boiling point (~230 °C) and near-negligible vapor pressure place it at or near VOC exemption thresholds in several key regulatory frameworks. Under the EU Paints Directive (2004/42/EC) and SCAQMD Rule 102 in California, high-boiling solvents above defined boiling point thresholds may qualify for reduced or zero contribution to regulated product VOC content calculations - potentially allowing higher DEGBE loading without exceeding VOC limits as a coalescing agent in architectural paints or coupling agent in cleaning concentrates. This can be a decisive formulation advantage as VOC limits continue to tighten globally. The specific regulatory treatment of DEGBE varies by jurisdiction and product category - buyers should verify with their regulatory compliance teams. Sinolook provides vapor pressure and boiling point documentation to support customers' VOC regulatory submissions.

How do I get a DEGBE price quote or sample?

Qualification samples (0.5–5 kg) available at nominal charge refundable against the first commercial order. Standard ≥99.0%; high-purity ≥99.5% available. Non-DG sample shipment - no DG documentation required.

  • Step 1: Contact us with requirements - grade (≥99.0% or ≥99.5%), quantity (MT), packaging, Incoterms, destination port, and any regulatory needs (REACH, HAP non-listing, VOC data, co-formulant support, etc.).
  • Step 2: Receive complete DEGBE price quote within 24 hours - unit price, non-DG packaging, freight estimate, lead time (10–15 days), documentation scope.
  • Step 3: Request qualification samples for formulation testing. Ask about DEGBEA (Butyl Carbitol Acetate) for ultra-slow retarder comparative evaluation.
  • Step 4: Confirm order - Sinolook handles production, non-DG packaging, full export documentation, and freight booking end-to-end.
  • Step 5: Receive shipment with complete documentation including HAP non-listing confirmation, REACH compliance letters, VOC data, agrochemical co-formulant regulatory package, and third-party inspection (SGS/Intertek/BV) on request.

Hot Tags: diethylene glycol monobutyl ether, China diethylene glycol monobutyl ether manufacturers, suppliers, glycol monobutyl ether, ethylene glycol butyl, butyl diglycol ether, ethylene glycol monobutyl ether, deg monobutyl ether, poly ethylene glycol ran propylene glycol monobutyl ether

Send Inquiry