What Is Triethylene Glycol Monoethyl Ether (TEGEE)?
- Boiling point ~256 °C - highest in the ethyl glycol ether series (EGEE 133–138 °C → DEGEE 194–205 °C → TEGEE ~256 °C); near-negligible vapor pressure at ambient temperature; potential VOC-exempt status in several regulatory frameworks.
- Flash point ~130 °C - not classified as a flammable liquid under GHS; no ATEX requirements, no DG transport classification; simplified storage and logistics vs. EGEE (FP 40–43 °C, Class 3 flammable).
- Not classified as Repr. 1B/2 under EU CLP - no REACH Annex XVII consumer restriction; favorable regulatory profile for EU-market formulations in coatings, cleaning, personal care, and pharmaceuticals.
Triethylene Glycol Monoethyl Ether (TEGEE, CAS 112-50-5) - also known as Ethyl Triglycol or 2-[2-(2-Ethoxyethoxy)ethoxy]ethanol (IUPAC) - is a clear, colorless, mildly odored liquid with molecular formula C₈H₁₈O₄ (MW 178.23 g/mol). TEGEE is the third homolog in the ethyl-terminated E-series glycol ether family, occupying the top rung above EGEE (one ethyleneoxy unit) and DEGEE (two ethyleneoxy units) with three ethyleneoxy units in its backbone. This extended chain delivers the series' most extreme combination of low volatility, high flash point, and sustained water miscibility - setting TEGEE apart from all shorter-chain analogs in high-temperature and precision-industrial applications.
TEGEE is fully miscible with water, alcohols, ketones, esters, and most common organic solvents. Its boiling point of ~256 °C, flash point of ~130 °C, and near-negligible vapor pressure at ambient temperature place it firmly in the ultra-high-boiling, ultra-low-volatility category - making it the preferred glycol ether solvent for baking enamel and stoving finish systems (remaining active as a flow agent through oven cure cycles), hot-tank industrial degreasing (stable in elevated-temperature cleaning baths), high-temperature chemical synthesis (above 200 °C without reflux systems), and electronics precision cleaning (no flash-off in heated cleaning equipment). Sinolook supplies both standard industrial grade (≥85.0%) and high-purity specialty grade (≥99.0%).
TEGEE is also the direct precursor to Triethylene Glycol Monoethyl Ether Acetate (TEGEEA), produced by esterification with acetic acid - a very slow-evaporating solvent for high-end automotive refinishing and premium industrial coating systems. Sinolook supplies TEGEEA alongside TEGEE; combined quotations available. ISO 9001 and ISO 14001 certified, with full COA, SDS, and REACH compliance documentation.
Key Performance Advantages of TEGEE
As the highest-boiling commercially available E-series ethyl glycol ether, Triethylene Glycol Monoethyl Ether offers a performance combination unreachable by EGEE or DEGEE - pairing an ultra-high boiling point and near-zero vapor pressure with a clean regulatory profile, non-flammable behavior, and dual-solvency coupling power that makes it uniquely suited to high-temperature processing, precision cleaning, and specialty formulation applications.
🌡️ Highest Boiling Point in the Ethyl Glycol Ether Series - ~256 °C
With a boiling point of ~256 °C, TEGEE is the highest-boiling member of the commercial ethyl glycol ether series - significantly above DEGEE (194–205 °C) and far above EGEE (133–138 °C). This property is decisive in baking enamel and stoving finish coating systems, where TEGEE remains as an active flow and leveling agent through the full oven cure cycle - maintaining viscosity reduction and promoting film flow until the resin reaches its crosslinking temperature. In high-temperature industrial processing (above 200 °C), TEGEE's stability eliminates the need for pressure vessels or continuous reflux condensers, reducing equipment cost and process complexity. Near-negligible ambient vapor pressure eliminates inhalation exposure risk under standard handling conditions.
🔥 Non-Flammable - Flash Point ~130 °C
TEGEE's flash point of ~130 °C exceeds the GHS flammable liquid classification threshold (<60 °C for Class 3) by a large margin, placing it firmly in the non-flammable category under standard ambient conditions. This eliminates the need for explosion-proof electrical equipment and ATEX zone compliance in storage areas, simplifies fire safety infrastructure in industrial facilities, and reduces insurance obligations compared to lower-flash-point solvents. No DG classification required for sea, air, or road transport - substantially reducing freight cost and documentation burden versus EGEE (UN 1171, Class 3, PG III). Hot-tank cleaning equipment and heated coating application systems can be operated without the fire and explosion risk associated with flammable solvent systems.
✅ Non-Repr.1B Regulatory Profile - EU Market Compliant
TEGEE is not classified as a reproductive toxicant under EU CLP Regulation - carrying no Repr. 1B/2 designation and no REACH Annex XVII consumer product restriction, in contrast to EGEE (Repr. 1B, H360D, Annex XVII Entry 30). This enables TEGEE's use in EU-market consumer and professional products across coatings, industrial cleaning, personal care, and pharmaceutical applications where EGEE would be restricted or require extensive risk management. REACH registered (EC 203-978-9); not SVHC listed. The combination of non-Repr.1B status, non-flammability, and near-zero vapor pressure gives TEGEE one of the most favorable overall safety and regulatory profiles of any industrial glycol ether solvent.
🔗 Dual Solvency & Coupling Power
TEGEE's triethylene glycol backbone provides strong hydrogen-bonding capacity and polarity for dissolving polar resins, electrolyte systems, and hydrophilic polymer networks, while its ethyl end-group retains sufficient hydrophobicity to dissolve mineral oils, waxes, synthetic lubricants, and lipophilic actives. This dual polar/non-polar solvency makes TEGEE an outstanding coupling agent for complex formulations combining aqueous and organic phases - waterborne high-solids coatings, semi-aqueous precision cleaning systems, agrochemical EC/SL concentrates, and multi-phase pharmaceutical and cosmetic systems. Fully miscible with water in all proportions; compatible with alcohols, ketones, esters, aromatics, and aliphatics.
📉 Ultra-Low VOC & Potential VOC Exemption
TEGEE's very high boiling point (~256 °C) places it at or near the threshold for VOC exemption in several regulatory frameworks. Under the EU Paints Directive (2004/42/EC) and certain US jurisdictions (SCAQMD Rule 102, California), high-boiling solvents above defined boiling point thresholds may be excluded from VOC calculations entirely - enabling coating and cleaning formulators to include TEGEE in their formulations without contributing to the regulated VOC content budget. This potential VOC-exempt status is a significant formulation advantage in markets where VOC limits are tightening for paints, coatings, and cleaning products. Buyers should verify applicable regulatory treatment under their specific jurisdiction; Sinolook provides supporting boiling point and vapor pressure data.
🎨 Baking Enamel & Stoving Finish Flow Agent
TEGEE's unique ability to remain in the liquid phase and continue functioning as a viscosity-reducing, flow-promoting agent through the full oven cure cycle of baking enamel and stoving finish systems is a performance characteristic that lower-boiling glycol ethers cannot replicate. As the oven temperature rises, lower-boiling co-solvents evaporate prematurely, causing viscosity spikes and flow interruptions that lead to orange-peel defects and uneven film surfaces. TEGEE remains active until the resin system reaches its crosslinking temperature, ensuring maximum film leveling and gloss in metal coating, appliance, coil coating, and automotive component applications.
📌 EGEE vs DEGEE vs TEGEE - Ethyl Glycol Ether Series Comparison
| Property | EGEE (CAS 110-80-5) | DEGEE (CAS 111-90-0) | TEGEE (CAS 112-50-5) |
|---|---|---|---|
| Boiling Point | 133–138 °C | 194–205 °C | ~256 °C ★ Highest |
| Flash Point | 40–43 °C (Flam. Liq. 3 ⚠) | ~96 °C (Non-flammable) | ~130 °C ★ Safest |
| Vapor Pressure | High | Low | Near-negligible ★ |
| EU Repr. Classification | Repr. 1B (H360D) ⚠ | Not classified ✓ | Not classified ✓ |
| REACH Annex XVII | Restricted (Entry 30) ⚠ | No restriction ✓ | No restriction ✓ |
| VOC Status | VOC-active | VOC-active | Potentially VOC-exempt ★ |
| Primary Strength | Fast-acting, strong NC solvency | Balanced performance, Transcutol equiv. | Max boiling point, baking enamel, hot-tank cleaning |
Triethylene Glycol Monoethyl Ether Uses & Applications
TEGEE (CAS 112-50-5) is selected specifically when lower-boiling glycol ethers - including DEGEE - still evaporate too quickly or when the highest available flash point, maximum thermal stability, and potential VOC-exempt status are required. Its seven primary application domains each exploit distinct aspects of its ultra-high-boiling, near-non-volatile, non-flammable solvent profile.
Baking Enamels, Stoving Finishes & High-Solids Coatings
TEGEE's standout application in coatings is as a flow and leveling agent that survives the full oven cure cycle in baking enamel and stoving finish systems applied to metal parts, automotive components, coil-coated panels, and appliance surfaces. Unlike lower-boiling co-solvents that evaporate in the initial heating ramp - causing viscosity spikes and orange-peel before crosslinking occurs - TEGEE maintains its plasticizing and flow-promoting action until the resin reaches its curing temperature, delivering smoother, more uniform film surfaces. Also functions as an ultra-high-boiling coalescing agent in high-solids waterborne coatings, providing maximum open time in cold-weather and fast-drying application environments.
Hot-Tank Industrial Degreasing & Precision Cleaning
TEGEE is specifically designed for industrial cleaning baths operating at elevated temperatures where lower-boiling solvents would flash off, lose concentration, and create fire hazard. In hot-tank degreasing for aerospace, automotive, and precision engineering components, TEGEE dissolves hydraulic fluids, compressor oils, silicone greases, drawing compounds, and polymeric residues while remaining stable in the liquid phase. In semi-aqueous electronics assembly cleaning, TEGEE removes rosin-based and no-clean flux residues from PCBs, with near-zero vapor pressure eliminating flash-off in heated spray-in-air and immersion cleaning equipment. Flash point ~130 °C provides a meaningful safety margin in heated cleaning systems.
High-Temperature Chemical Synthesis & TEGEEA Intermediate
As a reaction solvent, TEGEE's boiling point of ~256 °C enables high-temperature organic synthesis above 200 °C in open reflux systems without pressure vessels or closed-loop condenser systems that would be required with lower-boiling solvents. Its full water miscibility, chemical inertness toward most common reagents, and thermal stability make it a versatile solvent for surfactant synthesis, polymer processing, and specialty ester production. TEGEE is also the direct precursor to Triethylene Glycol Monoethyl Ether Acetate (TEGEEA) - esterification with acetic acid yields a very slow-evaporating solvent for premium automotive refinishing and high-end industrial coating systems. Sinolook supplies both TEGEE and TEGEEA.
Pharmaceuticals & Topical Drug Delivery
TEGEE functions as a skin penetration enhancer and co-solvent for poorly water-soluble APIs in topical and semi-solid dosage forms - antifungals, anti-inflammatories, and analgesics where transdermal delivery of the active ingredient is desired. Its triethylene glycol backbone partitions into the stratum corneum and disrupts lipid packing, enhancing API flux across the skin barrier. In oral liquid formulations and soft-gelatin capsule fills, TEGEE improves solubility of BCS Class II and IV APIs. Low toxicity profile, physiological compatibility, and non-Repr.1B classification support use as a pharmaceutical excipient under appropriate regulatory frameworks. High-purity grade (≥99.0%) available for pharmaceutical applications.
Personal Care & Premium Cosmetic Formulations
TEGEE's higher molecular weight relative to DEGEE delivers superior humectant performance - stronger moisture retention at the skin surface and longer-lasting hydration in moisturizers, body lotions, and hand creams. Solubilizes lipophilic cosmetic actives (retinoids, tocopherols, ceramides, botanical oils) in water-based formulations, enabling high-active-load serums and treatment products without emulsification systems. Its non-greasy, non-tacky sensory profile supports use in premium anti-aging and intensive moisturizing product lines. INCI compliant; regulatory acceptance under EU Cosmetics Regulation. Particularly well-suited to prestige personal care brands requiring high active solubilization capacity.
Agrochemical Formulations
Co-solvent in emulsifiable concentrate (EC), suspension concentrate (SC), and soluble liquid (SL) formulations of herbicides, insecticides, and fungicides. Solubilizes lipophilic active ingredients and stabilizes single-phase EC concentrates combining hydrophilic and hydrophobic components. Enhances spray wetting, penetration, and rainfastness on crop and leaf surfaces - slow evaporation rate prolongs active contact time compared to faster-evaporating co-solvents. Non-flammable handling characteristics improve safety in agrochemical mixing and filling facilities. Coupling power bridges aqueous-diluted spray solutions with lipophilic active deposits.
Electronics & Semiconductor Cleaning
Process solvent in high-temperature photoresist stripping and precision PCB cleaning formulations where near-zero vapor pressure prevents flash-off during heated cleaning cycles - a critical requirement in clean-room environments where airborne solvent contamination must be eliminated. Used in post-solder flux removal (rosin-based and no-clean fluxes), edge-bead removal, and specialty substrate cleaning for advanced packaging applications. High solvency for photosensitive polymer films combined with aqueous-rinse compatibility supports use in both spray-in-air and immersion cleaning systems. Low VOC contribution supports environmental compliance in semiconductor manufacturing facility solvent abatement programs.
Technical Specifications & COA
Sinolook's Triethylene Glycol Monoethyl Ether is manufactured under strict quality control with every production batch tested against the parameters below. A full Certificate of Analysis (COA), TEGEE SDS / MSDS (GHS-compliant, multi-language), and Technical Data Sheet (TDS) are provided with every shipment. Two grade options: standard industrial (≥85.0%) and high-purity specialty (≥99.0%) - contact us to specify.
TEGEE (Ethyl Triglycol, CAS 112-50-5) - Quality Specifications & Typical COA
| Parameter | Industrial Grade Spec. | High-Purity Grade Spec. | Typical COA Result |
|---|---|---|---|
| Appearance | Clear, colorless liquid | Clear, colorless liquid | Clear colorless liquid |
| Purity (GC), wt% | ≥85.0% | ≥99.0% | Meets grade spec. |
| Water Content (Karl Fischer), wt% | ≤0.1% | ≤0.05% | 0.03 – 0.08% |
| Density (20 °C), g/cm³ | 1.016 – 1.024 | 1.018 – 1.023 | 1.019 – 1.022 |
| Boiling Point, °C | ~256 °C (1 atm) | ~256 °C (1 atm) | 253 – 259 °C |
| Flash Point (closed cup), °C | ≥120 °C | ≥125 °C | ~130 °C |
| Color (Pt-Co / APHA) | ≤30 | ≤15 | ≤15 |
| Viscosity (25 °C), mPa·s | ~7.5 | ~7.5 | 7.0 – 8.0 |
| Acidity (as acetic acid), wt% | ≤0.005% | ≤0.003% | <0.002% |
| Residue on Evaporation, wt% | ≤0.02% | ≤0.01% | <0.01% |
Grade Selection: Industrial grade (≥85.0%) is suitable for coatings, cleaning, and chemical synthesis applications. High-purity grade (≥99.0%) is recommended for pharmaceutical excipient use, electronics precision cleaning, and specialty chemical synthesis requiring low impurity profiles. Companion product TEGEEA (Triethylene Glycol Monoethyl Ether Acetate) available - contact sales@sinolookchem.com for combined product specifications and pricing. Packaging: 200 kg iron drums; 1,000 kg IBC tanks; bulk ISO tank containers.
TEGEE SDS, Safety & Regulatory
Triethylene Glycol Monoethyl Ether combines an excellent toxicological profile with the most favorable physical safety characteristics of any commercial ethyl glycol ether: not a reproductive toxicant, not classified as a flammable liquid (flash point ~130 °C), and a near-negligible vapor pressure that virtually eliminates inhalation exposure risk under standard industrial handling. No REACH Annex XVII consumer restriction. Not SVHC listed. No DG transport classification required. TEGEE SDS / MSDS are GHS-compliant and available in English, German, French, Spanish, and Chinese.
| Safety / Regulatory Parameter | Value / Notes |
|---|---|
| GHS Classification | Eye Irrit. 2; Skin Irrit. 2 - not classified as flammable liquid, combustible liquid, or reproductive toxicant |
| GHS Signal Word | WARNING |
| Flash Point & Transport | ~130 °C (cc) - not classified as flammable liquid under GHS; no UN / DG classification required; standard non-DG sea, air, and road freight; no ATEX zone requirements in storage |
| Reproductive Toxicity | Not classified - no Repr. 1B/2 designation; no REACH Annex XVII restriction; no consumer product limitation |
| VOC Status | Potentially VOC-exempt under EU Paints Directive (2004/42/EC) and certain US jurisdictions (SCAQMD Rule 102) based on boiling point threshold; buyers should verify applicable regulatory treatment in their market; Sinolook provides BP and vapor pressure data for regulatory submissions |
| REACH / SVHC Status | REACH registered (EC 203-978-9); Not SVHC listed; No Annex XVII restriction; REACH compliance letter available on request |
| US / California | Not listed under California Prop 65; TSCA compliance confirmation available; OSHA HazCom standard applies |
| PPE Recommended | Safety glasses; nitrile or neoprene gloves; avoid prolonged skin and eye contact; adequate general ventilation; no special respiratory protection required under normal ambient handling conditions (near-zero vapor pressure) |
| Storage | Cool, dry, well-ventilated area; 5–40 °C; sealed containers; no explosion-proof electrical equipment required; segregate from strong oxidizers, concentrated acids, strong alkalis; shelf life 24 months |
| Request SDS / COA / TDS | sales@sinolookchem.com or WhatsApp +86 134 0071 5622 - issued within 24 hours |
TEGEE Price, Packaging & B2B Supply
Triethylene glycol monoethyl ether price is available in two grade tiers: standard industrial (≥85.0%) and high-purity specialty (≥99.0%). As a direct manufacturer, Sinolook eliminates distributor markups with transparent volume-tiered pricing. Non-DG transport classification simplifies logistics cost vs. EGEE. Annual supply contracts with price stability available. Request a customized TEGEE price quote - 24-hour response.
| Order Volume | Packaging | Included Services |
|---|---|---|
| 0.5 – 5 kg (Sample) | Sample bottle / small drum | COA, TEGEE SDS/MSDS, TDS; nominal charge refundable against first commercial order; specify grade (≥85% or ≥99%) |
| 1 MT – 20 MT (Regular) | 200 kg iron drums / 1,000 kg IBC tanks | Volume discount; non-DG standard freight; dedicated account manager; REACH and regulatory documentation |
| 20 MT+ (Bulk / Contract) | IBC tanks / ISO tank containers (non-DG) | Best TEGEE price; fixed-price annual supply contract; reserved production capacity; SGS/Intertek inspection available |
📦 MOQ & Grades
1 MT MOQ. Two grades: industrial ≥85.0% and high-purity ≥99.0%. Samples (0.5–5 kg) refundable against first order.
🚢 Delivery Terms
EXW, FOB, CFR, CIF, DAP, DDP. Ex-Shanghai, Tianjin, Qingdao, Guangzhou, Ningbo. Non-DG freight - lower cost vs. flammable solvents.
⏱ Lead Time
Price quote within 24 hours. Production and export: 10–15 business days. Expedited available. Shelf life 24 months.
🔍 Inspection
SGS, Intertek, or Bureau Veritas inspection at buyer's cost. Notify at order placement for scheduling. COA issued for all orders.
- ✓ ISO 9001 & ISO 14001 certified - every batch QC tested for GC purity, Karl Fischer, density, color, flash point, and viscosity; on-site GC, Karl Fischer, and colorimetry instruments
- ✓ Full export documentation: COA, TEGEE SDS/MSDS (multi-language), TDS, Certificate of Origin, packing list, commercial invoice, bill of lading (non-DG)
- ✓ REACH compliance letter (EC 203-978-9), SVHC declaration, TSCA compliance confirmation, and Prop 65 statement available on request
- ✓ VOC boiling point / vapor pressure data for regulatory submissions under EU Paints Directive, SCAQMD, and other VOC frameworks available
- ✓ Companion product TEGEEA (Triethylene Glycol Monoethyl Ether Acetate) available - combined TEGEE + TEGEEA quotation on request
- ✓ Full ethyl glycol ether series available: EGEE · DEGEE · TEGEE - consolidate shipments for lower per-unit freight; technical support for series selection and formulation guidance
Frequently Asked Questions About TEGEE
Technical and commercial questions about Triethylene Glycol Monoethyl Ether / Ethyl Triglycol (CAS 112-50-5) from B2B buyers in coatings, industrial cleaning, electronics, pharmaceuticals, and specialty chemical applications.
What is Triethylene Glycol Monoethyl Ether (TEGEE) and what is it used for?
Triethylene Glycol Monoethyl Ether (TEGEE, CAS 112-50-5) - also known as Ethyl Triglycol - is the highest-boiling commercially available ethyl-terminated E-series glycol ether, with a boiling point of ~256 °C, flash point of ~130 °C (non-flammable), and near-negligible ambient vapor pressure. Selected when lower-boiling glycol ethers (EGEE or DEGEE) still evaporate too quickly. Primary uses: flow and leveling agent in baking enamel and stoving finish coating systems (survives oven cure cycle); hot-tank industrial degreasing at elevated temperatures; high-temperature chemical synthesis above 200 °C; pharmaceutical skin penetration enhancer and API co-solvent; premium cosmetic humectant and active solubilizer; electronics/PCB precision cleaning (zero flash-off in heated equipment); agrochemical EC/SL co-solvent; and as precursor to TEGEEA for automotive refinishing.
What are the synonyms and CAS number for TEGEE?
The TEGEE CAS number is 112-50-5 (EC 203-978-9). Synonyms include Ethyl Triglycol (most common trade name), 2-[2-(2-Ethoxyethoxy)ethoxy]ethanol (IUPAC), Triglycol Monoethyl Ether, and Ethyl Carbitol Extended. In procurement documents, always use CAS 112-50-5 to avoid confusion with TEGMME (Triethylene Glycol Monomethyl Ether, CAS 112-35-6 - similar MW but methyl-terminated), DEGEE (CAS 111-90-0, two ethyleneoxy units), or EGEE (CAS 110-80-5, one ethyleneoxy unit, Repr. 1B).
What standard purity grades does Sinolook offer, and when is ≥99.0% needed?
Sinolook supplies two grades: Industrial grade (≥85.0%) - suitable for coatings, cleaning formulations, chemical synthesis, and agrochemical applications where process impurities do not affect performance. High-purity grade (≥99.0%) - recommended for pharmaceutical excipient use (skin penetration enhancer, API co-solvent), high-specification electronics precision cleaning where trace impurities could contaminate sensitive substrates, and specialty chemical synthesis requiring low-impurity solvent environments. Contact our sales team with your purity requirements for grade-specific specifications and pricing.
How does TEGEE compare to DEGEE and TEGMME?
TEGEE (CAS 112-50-5) vs DEGEE (CAS 111-90-0): TEGEE has one additional ethyleneoxy unit - higher BP (~256 °C vs 194–205 °C), higher flash point (~130 °C vs ~96 °C), lower vapor pressure, and slightly more hydrophobic character from its ethyl end-group. Choose TEGEE when DEGEE still evaporates too quickly or when oven-cure stability, hot-tank cleaning, or maximum VOC reduction is required. TEGEE vs TEGMME (CAS 112-35-6): similar molecular weights (178.23 vs 164.20 g/mol) and comparable boiling points; TEGEE's ethyl end-group gives it slightly more hydrophobic solvency (better for non-polar resins), while TEGMME's methyl end-group makes it slightly more polar (better for highly water-reduced systems). Neither is Repr. 1B - selection between the two is driven by fine-tuning of solvency parameters. Sinolook supplies all three; contact our technical team for application-specific guidance.
Is TEGEE exempt from VOC regulations?
TEGEE's boiling point of ~256 °C places it at or near the VOC exemption threshold in several regulatory frameworks. Under the EU Paints Directive (2004/42/EC), solvents with boiling points above 250 °C at atmospheric pressure may qualify for VOC exemption, potentially allowing TEGEE to be excluded from a formulation's regulated VOC content. Under SCAQMD Rule 102 in California, similar high-boiling-point exemptions may apply. The specific regulatory treatment of TEGEE varies by jurisdiction, product category, and applicable rule - buyers should verify with their regulatory compliance team. Sinolook provides boiling point, vapor pressure, and photochemical reactivity data to support customers' VOC regulatory submissions. We recommend consulting the applicable regulations or a regulatory specialist for definitive VOC status determination in your market.
How do I get a TEGEE price quote or sample?
Qualification samples (0.5–5 kg) are available at a nominal charge refundable against the first commercial order. Specify your required grade (≥85% industrial or ≥99% high-purity) when requesting.
- Step 1: Contact us with your requirements - grade (≥85% or ≥99%), quantity (MT or kg), packaging, delivery terms (FOB/CIF/DDP), and destination port.
- Step 2: Receive a complete TEGEE price quote within 24 hours - unit price, packaging, non-DG freight estimate, lead time (10–15 days), and documentation scope.
- Step 3: Request qualification samples for formulation testing. Ask about TEGEEA (acetate derivative) samples for comparative evaluation.
- Step 4: Confirm order - Sinolook handles production, standard non-DG packaging, full export documentation, and freight booking end-to-end.
- Step 5: Receive shipment with complete traceability documentation. REACH compliance letters, VOC data, third-party inspection (SGS/Intertek/BV), and high-purity pharmaceutical-grade documentation available on request.
Hot Tags: triethylene glycol monoethyl ether, China triethylene glycol monoethyl ether manufacturers, suppliers, 2 ethoxyethanol, diethylene glycol monopropyl ether, ethylene glycol monoethyl ether cas, glycol monoethyl ether, mono ethyl ether, triethylene glycol monoethyl ether
