Lubricant Additives - Anti-Wear & Antioxidant Additives Series: Primary C8 ZDDP is the pure di-n-octyl grade of the Sinolook ZDDP range - the longest-chain primary alkyl ZDDP in the series. Where the mixed C4/C8 grade balances short-chain reactivity with long-chain stability, the pure C8 grade maximises all the advantages of extended n-alkyl chain length: highest thermal stability in the primary series, best solubility in Group III, Group IV (PAO), and ester base oils, and the cleanest thermal decomposition profile (fewest acidic by-products at high temperatures). Preferred for premium synthetic engine oils, high-temperature industrial lubricants, and applications requiring maximum oxidative stability from the ZDDP component. Sinolook ZDDP series: Primary C4/C8 Mixed · Primary C8 (this grade) · Secondary ZDDP.
Anti-Wear · Antioxidant · Corrosion Inhibitor · Pure n-C8 Primary Alkyl · Best Synthetic Oil Solubility · Highest Thermal Stability in Primary Series · HDEO · Synthetic PCMO · Industrial High-Temp · ⚠ Zn/P/S SAPS budget required
Primary C8 ZDDP
Di-n-Octyl Zinc Dialkyldithiophosphate / Zn[S–P(S)(OC₈H₁₇)₂]₂ / Thiophosyl alkyl zinc salt / Zn 7.0–10.0% · P 5.0–8.0% · S 10.0–14.0% / Pure C8 Primary - Maximum Thermal Stability · Premium Synthetic Oil Grade
| CAS Number | 4991-47-3 (pure di-n-octyl); 85940-28-9 (commercial blend ref.) |
| Formula | Zn[S–P(S)(OC₈H₁₇)₂]₂ · R = n-C₈H₁₇ (n-octyl, both chains) |
| Synonyms | Primary C8 ZDDP · Di-n-octyl ZDDP · Zinc di-n-octyldithiophosphate · Zinc O,O-di-n-octyl dithiophosphate · Thiophosyl alkyl zinc salt · ZDDP C8 · Long-chain primary ZDDP |
| Alkyl Structure | PURE n-C8 - all four alkyl chains are n-octyl (n-C₈H₁₇); molecular weight ~960 (pure compound, before diluent); higher MW than C4/C8 mixed grade (~760–850) → slightly lower active element % per gram at equivalent diluent content |
| ★ vs C4/C8 Mixed | ★ Higher thermal stability (pure long-chain) ★ Better solubility in Group III / PAO / ester ★ Cleaner high-temp decomposition - less acid |
| SAPS Status | ⚠ Zn 7–10% → S/A ⚠ P 5.0–8.0% ⚠ S 10–14% |
| GHS / Safety | FP ≥180°C H315/H317/H319 irritant |
What Is Primary C8 ZDDP & Why Pure n-Octyl?
Primary C8 ZDDP (zinc O,O-di-n-octyl dithiophosphate) is synthesised exclusively from n-octanol (1-octanol, C₈H₁₇OH) - all four alkyl chains flanking the two phosphorus centres are linear primary n-octyl groups. This single-alkyl-type architecture distinguishes it from the mixed C4/C8 grade (which carries both n-butyl and n-octyl chains on the same molecule) and from secondary ZDDP grades (which use branched isopropyl or sec-butyl chains). The pure C8 structure means every molecule in the batch has an identical, well-defined alkyl environment around the phosphorus-sulphur coordination sphere - delivering more consistent and predictable thermal decomposition kinetics than mixed-chain grades.
The primary advantage of the C8 chain length over shorter primary alkyls is its effect on two interconnected properties: oil solubility and thermal stability. Solubility in non-polar base oils (Group III hydrocracked, Group IV PAO, Group V esters) increases with alkyl chain length due to improved hydrocarbon chain compatibility (like-dissolves-like principle applied to polymer-solvent interactions). ZDDP grades with C₄ chains can show borderline solubility or haze in high-purity low-polarity Group III/PAO base stocks at low temperatures, while C8 grades remain fully clear. Thermal stability - the resistance of the P–O–C bond to unimolecular or acid-catalysed cleavage at elevated temperatures - also improves with chain length, because the larger alkyl group sterically shields the P–O–C linkage from nucleophilic attack by traces of water or acidic species. This translates to longer service life at crankcase temperatures above 130°C.
| Property | Primary C8 ★ (this) | Primary C4/C8 Mixed | Secondary ZDDP |
|---|---|---|---|
| Alkyl type | Pure n-C8 (all 4 chains) | Mixed n-C4 + n-C8 | iso-C3 / sec-C4 / sec-C8 |
| Thermal stability | ★★★ Highest | ★★ High | ★ Moderate |
| Gp III / PAO solubility | ★★★ Excellent | ★★ Good | ★★ Good |
| Tribofilm formation (cold start) | Slower onset | Moderate | ★★★ Fastest |
| Antioxidant performance | ★★★ Strongest | ★★★ Strong | ★★ Good |
| Decomposition cleanliness | ★★★ Cleanest (fewest acidic by-products) | ★★ Clean | ★ β-elimination → olefins + H₃PO₄ |
| Active element % (Zn/P/S) | Slightly lower (higher MW per Zn) | Mid range | Highest (low MW alkyl) |
| Ideal application | Synthetic oils, high-temp industrial | General-purpose HDEO/PCMO | Fast cold-start PCMO |
All ZDDP grades form their protective tribofilm through thermal/tribochemical decomposition - the molecule breaks down at the metal contact surface to generate zinc polyphosphate glass. The pathway of decomposition differs critically between primary and secondary alkyls:
P–O–C bond cleaves via hydrolysis (trace water at high temp): R–O–P → ROH + PO⁻. n-octanol (C₈H₁₇OH) is the organic by-product - a relatively inert, non-acidic, non-corrosive alcohol. The inorganic phosphate species (ZnO/Zn₃(PO₄)₂) forms the protective glass film. No acid formation, no corrosive by-products.
The β-hydrogen on the secondary alkyl group (e.g. isopropyl: CH₃–CH(–O–P)–CH₃) undergoes elimination at elevated temperature: the P–O bond breaks via E2 elimination, producing an olefin (e.g. propene CH₃–CH=CH₂) and H₃PO₄ (phosphoric acid). The acid can attack bearing metals (Pb, Cu, Sn), increasing corrosive wear - managed by TBN reserve (detergent/dispersant) in the formulation.
Practical implication: Primary C8 ZDDP is the preferred grade for applications with tight corrosion requirements (precision bearing steels, non-ferrous alloy contacts) and long drain intervals where acid accumulation from secondary ZDDP decomposition would consume TBN reserve too rapidly. In HDEO long-drain service (100,000+ km), the cleaner primary decomposition pathway preserves TBN headroom for acid neutralisation from combustion blowby - not from the ZDDP additive itself.
Technical Specification
S/A ≈ Zn% × 1.24; same range as C4/C8 mixed - active element content maintained despite higher MW via adjusted diluent level
Lower floor (5.0% vs 5.5% for C4/C8 mixed) reflects higher MW of pure C8 molecule - specify P% grade; same finished-oil P budget rules apply
Same range as mixed grade; confirm grade-specific S% on COA; include in ACEA sulphur budget
Slightly higher than C4-containing grades (longer C8 chains increase intrinsic viscosity modestly); still negligible contribution at 0.5–1.5 wt% treat in finished oil
SAPS Budget - Same Rules Apply as Primary C4/C8 Grade
Primary C8 ZDDP carries the same Zn, P, and S active element content ranges as the mixed C4/C8 grade. All SAPS budget calculations are identical: P in finished oil = (ZDDP treat% × P%)/100. ACEA C3/API SP P ≤0.08%: max treat at P=7% = 1.14 wt%; at P=8% = 1.00 wt%. ACEA E6/E9 and API CK-4 have no P limit - treat rate governed by AW performance target and total TBN budget only. Key distinction vs C4/C8 mixed: the P% floor is 5.0% (vs 5.5%) due to higher molecule MW - specify your target P% grade at order. For premium synthetic oil formulations where thermal decomposition cleanliness is critical (long-drain HDEO, turbocharged PCMO), Primary C8 is the recommended grade despite identical SAPS numbers - the quality of the tribofilm and the absence of acid by-products from decomposition justify the slight premium vs mixed grade.
| Parameter | Specification | Test Method | Note vs C4/C8 Mixed Grade |
|---|---|---|---|
| Appearance | Clear to amber liquid | Visual | Similar colour; typically slightly clearer in Group III/PAO base stocks due to better solubility - the C8 grade is less prone to showing faint haze at low temperatures in high-purity base oils |
| Zinc Content ⚠ | 7.0–10.0 wt% | ASTM D4628 | Same range as C4/C8 mixed - active Zn level maintained via adjusted diluent; specify grade Zn% for SAPS budget; S/A = Zn% × 1.24 |
| Phosphorus ★ ⚠ | 5.0–8.0 wt% | ASTM D1091 | Floor 5.0% vs 5.5% for C4/C8 mixed - pure C8 molecule has higher MW (no lighter C4 chains pulling MW down); same finished-oil P budget rules; specify P% grade at order |
| Sulphur ⚠ | 10.0–14.0 wt% | ASTM D1552/D2622 | Same range as mixed grade |
| Flash Point (COC) | ≥ 180°C | ASTM D92 | Same classification; n-octanol FP is 81°C - ZDDP FP is governed by the diluent oil component, not the alkyl chain volatility |
| Kinematic Viscosity @100°C | 10–25 cSt | ASTM D445 | Marginally higher than C4/C8 mixed within the same 10–25 cSt range due to larger C8 molecule; still negligible at normal treat rates |
| Density @20°C | 1.10–1.20 g/cm³ | ASTM D4052 | Same range as mixed grade; use for mass-to-volume treat rate conversion in blending |
| ★ Thermal Stability | ★ Highest in primary series | ASTM D2070 / Penn State | KEY DIFFERENTIATOR - pure C8 exhibits lower rate of P–O–C bond hydrolysis / thermal cleavage vs mixed C4/C8 grade; confirmed in Penn State Micro-Oxidation test and Sequence IIIGH oxidation rating; specify "Primary C8" (not mixed) for synthetic oil premium formulations |
Applications & Why C8 Is the Preferred Grade
1. Premium Synthetic Engine Oils - Group III / PAO / Ester Base
Primary C8 ZDDP is the grade of choice for fully synthetic engine oil formulations (Group III, PAO, and ester base oils) where ZDDP solubility, oxidative stability, and clean decomposition are all critical. In high-purity Group III base stocks (viscosity index >130, very low aromatics), the shorter C4 component of mixed-grade ZDDP can produce faint haze or borderline solubility at cold soak temperatures (−20°C), while pure C8 remains fully soluble. In PAO base stocks (completely non-polar branched oligomers), the longer C8 alkyl chain matches the non-polar character of the base oil matrix better - consistent with the formulation principle that additive solubility requires hydrocarbon compatibility between additive tail groups and base oil. For turbo-direct-injection engines running fully synthetic 5W-30 (API SP / ACEA C3), Primary C8 ZDDP at 0.8–1.0 wt% provides superior Sequence IIIGH oxidation performance vs the mixed grade due to its higher inherent thermal stability.
2. Long-Drain HDEO - 100,000+ km Synthetic SAE 15W-40/10W-30
For premium HDEO formulations with extended oil drain intervals (100,000 km or 500 operating hours), the thermal stability advantage of Primary C8 is most commercially significant. At the 80,000–100,000 km service point, the ZDDP in a long-drain HDEO has been exposed to sump temperatures of 120–140°C for extended periods, and the P–O–C bond integrity directly determines whether the anti-wear tribofilm can be regenerated throughout the drain interval. Primary C8 ZDDP, with its superior P–O–C bond hydrolytic stability and cleaner decomposition (no acid generation from β-elimination), maintains tribofilm regeneration capacity further into the drain interval than mixed or secondary grades. The cleaner decomposition also means lower TBN consumption by ZDDP decomposition acid, preserving more TBN reserve for neutralising combustion blowby acids - a meaningful advantage in the final 20,000–30,000 km of a long drain.
3. High-Temperature Industrial Lubricants
In high-temperature industrial applications - reciprocating compressor oils (discharge valve temperature 180–220°C), turbine circulating oils (bearing journal temperature 120–150°C), and synthetic industrial gear oils (CLP EP, sump 100–130°C) - the ZDDP component must survive without thermal degradation for 4,000–8,000 hours of continuous service. Primary C8 ZDDP's higher P–O–C bond stability means it remains intact and available for tribofilm regeneration throughout these extended service intervals. In PAO-based synthetic compressor oils (ISO VG 46/68), C8 ZDDP's excellent PAO solubility also prevents phase separation or additive settling during oil-change intervals and cold shutdown periods.
4. Blending Component in PCMO Additive Packages
In PCMO additive packages (DI packages for API SP / ILSAC GF-6A/B), ZDDP is often used as a binary or ternary blend: Primary C8 ZDDP provides the high-temperature antioxidant and long-drain stability component, while Secondary ZDDP (isopropyl or sec-butyl grade) provides faster cold-start tribofilm activation. A typical blend ratio is 60–70 wt% Primary C8 ZDDP + 30–40 wt% Secondary ZDDP - balancing the cold-start cam wear performance (ASTM Sequence IVA/IVB, which is sensitive to early tribofilm formation) with the high-temperature oxidation stability (Sequence IIIGH) that Primary C8 enables. In this role, Primary C8 ZDDP is the "backbone" ZDDP providing baseline anti-wear and AO performance, complemented by secondary ZDDP for low-temperature activation.
Frequently Asked Questions
Q: Why do some formulations specify "Primary C8 only" rather than allowing the mixed C4/C8 grade?
Three technical reasons drive the "C8 only" specification in certain premium formulations. First, Group III/PAO solubility assurance at cold temperatures: some OEM-approved synthetic formulations specify a cold soak transparency test (typically −20°C for 72 hours) as part of the finished oil qualification, and mixed-grade ZDDP can introduce borderline turbidity that pure C8 does not. Second, thermal decomposition acid neutralisation budget: in formulations optimised for exact TBN reserve at end-of-drain (especially ACEA E6/E9 long-drain HDEO with TBN ≥9 mgKOH/g target at drain), the lower acid generation from C8 primary decomposition vs mixed grade provides a more predictable TBN consumption trajectory - avoiding the need to over-engineer the TBN reserve with extra detergent. Third, regulatory/OEM quality programmes: some OEM lubricant approval programmes (e.g. Mercedes-Benz MB 228.61, Volvo VDS-5) specify ZDDP alkyl type in the formulation disclosure as part of lubricant registration, requiring manufacturers to match the reference formulation alkyl type when using the approved formulation as a template.
Q: Is Primary C8 ZDDP suitable for use in aftermarket add-pack products ("oil supplement with ZDDP")?
Yes - Primary C8 ZDDP is an excellent choice for aftermarket ZDDP supplement products (similar in concept to Rislone ZDDP, Driven Racing Oil, or Lucas ZDDP additive), particularly those targeted at older high-performance engines with flat-tappet camshafts, which require higher ZDDP levels than modern API SP engine oils provide. The C8 grade's superior thermal stability and clean decomposition are advantageous in older engine designs with higher operating temperatures and less controlled combustion environments. For aftermarket supplement formulation: typical add-pack ZDDP treat rate is 3–8% of the add-pack product, which is added at 3–5% to the finished oil - resulting in a ZDDP contribution of 0.09–0.40% ZDDP additive in finished oil. Even at the high end of this range (raising finished oil P by ~0.02–0.03%), the treat rate is modest by engine performance standards. Note: in new vehicles with ACEA C3/API SP warranties, adding aftermarket ZDDP supplements may void the warranty by raising finished oil P above specification - advise customers accordingly.
Q: What is the shelf life difference between Primary C8 ZDDP and the mixed C4/C8 grade?
Both Primary C8 and mixed C4/C8 ZDDP grades have a shelf life of 12 months under recommended sealed dry storage conditions (0–40°C). The primary degradation mechanism for both is slow hydrolysis of the P–O–C bond in the presence of trace moisture - generating phosphoric acid and the corresponding alcohol. Primary C8 ZDDP hydrolyses slightly more slowly than the mixed grade (the longer C8 chain provides additional steric protection of the P–O–C bond), so in practice Primary C8 often maintains specification compliance beyond 12 months if stored correctly - but the 12-month guarantee is the commercial standard for planning purposes. In both cases, the key storage requirement is sealed containers with ≤0.10% water by KFT, avoidance of temperature cycling (condensation from headspace humidity in partially emptied drums accelerates hydrolysis), and use of nitrogen blanket for opened bulk containers. On-receipt KFT and P% checks are recommended for any material stored beyond 9 months.
Technical & Regulatory References
D4628 (Zn%) · D1091 (P%) · D1552/D2622 (S%) · D445 (KV @100°C) · D4052 (density) · D92 (FP) · KFT (water ≤0.10%) · D130 (Cu strip 1b) · ASTM D2070 / Penn State Micro-Oxidation (thermal stability - key differentiator vs mixed grade) · D4172 (4-ball wear) · D2882 (Vickers vane pump) · ASTM Sequence IVA/IVB · ASTM Sequence IIIGH · GC (n-C8 alkyl purity confirmation on request)
Premium synthetic HDEO: API CK-4/FA-4 · ACEA E6/E9 · MB 228.51/228.61 · Volvo VDS-5 · Mack EO-O PP · Synthetic PCMO (backbone AW): API SP · ILSAC GF-6A/B · ACEA C3 (low-P grade) · GM dexos1 Gen3 · Hydraulic: DIN 51524-2/3 HM zinc-type · Denison HF-0/HF-2 · Gear: ISO CLP/CLP-HC · DIN 51517-3 · Compressor: ISO 6743-3 DAH (synthetic) · Turbine: ISO 6743-5
REACH registered · TSCA listed · CAS 4991-47-3 · SAPS-active: Zn/P/S all contribute - same budget rules as mixed grade · n-octyl alcohol (C8H17OH) is the primary decomposition by-product - non-toxic, non-acidic, REACH compliant · GHS SDS available · No SVHC
Primary C4/C8 Mixed ZDDP ✅ · Primary C8 ZDDP ✅ (this product) · Secondary ZDDP (next - branched alkyl, fastest cold-start tribofilm) · Amine AO · Phenolic AO · Friction Modifiers
Primary C8 ZDDP · Zn[S-P(S)(OC₈H₁₇)₂]₂ · Pure Di-n-Octyl · Zn 7–10% · P 5–8% · S 10–14% · Highest Thermal Stability · Premium Synthetic Grade · COA/TDS/SDS
Request Pricing, TDS & Technical Support
Specify target Zn%, P%, S% (n-C8 purity grade), application (synthetic HDEO · PCMO PAO/Gp III · hydraulic · compressor), P budget constraint (ACEA E9 no limit · ACEA C3 ≤0.08% · etc.), volume, and destination port. Full COA (Zn/P/S by ICP-OES confirmed), TDS, SDS, and n-C8 alkyl purity confirmation by GC available on request. Qualification samples (200 mL – 5 kg) available.
Anti-Wear & Antioxidant Series: Primary C4/C8 ZDDP ✅ · Primary C8 ZDDP ✅ · Secondary ZDDP (next) · Amine AO · Phenolic AO · Friction Modifiers · Corrosion Inhibitors
Hot Tags: primary c8 zddp, China primary c8 zddp manufacturers, suppliers, 2 6 di tert butyl para cresol, 2 6 di tert butyl 4 cresol, 2 6 di t butyl p cresol, 2 6 di tert butyl p cresol
