What Is Diethylene Glycol Monopropyl Ether (DEGPE)?
- Flash point ~96 °C - not classified as a flammable liquid under GHS (threshold <60 °C); no ATEX requirements, no DG transport classification, simplified storage vs. EGPE (FP ~52 °C, Class 3 flammable) and EGEE (FP ~40 °C, Class 3 flammable). Non-DG sea, air, and road freight.
- Not classified as Repr. 1B/2 under EU CLP - no REACH Annex XVII consumer restriction; fully eligible as co-formulant in EU crop protection products under Regulation (EC) No 1107/2009. Not SVHC listed; not Prop 65 listed.
- Boiling point 208–218 °C - high-boiling, low-volatility solvent with near-negligible ambient vapor pressure; maximum open time in coatings, hot-tank cleaning stability, and low VOC contribution in formulations.
Diethylene Glycol Monopropyl Ether (DEGPE, CAS 6881-94-3) - commercially known as Propyl Carbitol or 2-(2-Propoxyethoxy)ethanol (IUPAC) - is a clear, colorless, mildly odored liquid produced by etherification of diethylene glycol with n-propanol under catalytic conditions. Its molecular formula is C₇H₁₆O₃ (MW 148.20 g/mol). DEGPE is the propyl-terminated member of the diethylene glycol monoalkyl ether (Carbitol) family - the propyl analog of DEGMME (methyl, CAS 111-77-3) and DEGEE (ethyl, CAS 111-90-0, Carbitol) - and sits between DEGEE and DEGBE (butyl, CAS 112-34-5) in the homologous series with a boiling point of 208–218 °C.
The diethylene glycol backbone of DEGPE provides two ether oxygen atoms that enhance hydrogen-bonding capacity and polarity - delivering strong solvency for polar resins, electrolyte systems, and cellulosic materials - while its n-propyl end-group retains sufficient hydrophobic character to dissolve oils, waxes, and greases. This dual amphiphilic nature makes DEGPE an outstanding coupling agent in waterborne formulations bridging aqueous and hydrophobic phases. DEGPE is fully miscible with water, alcohols, ketones, esters, aromatics, and aliphatics. Its combination of non-flammable behavior at ambient temperature and non-Repr.1B regulatory status gives it a uniquely favorable safety profile among propyl glycol ethers.
DEGPE is the precursor to Propyl Carbitol Acetate (Diethylene Glycol Monopropyl Ether Acetate, CAS 20706-25-6) - esterification with acetic acid yields a very slow-evaporating companion solvent for high-performance industrial and automotive refinishing coatings. Sinolook is developing supply capability for this derivative; contact our team for availability. ISO 9001 and ISO 14001 certified, purity ≥99.0%, full COA, GHS SDS, REACH documentation, and non-DG export logistics.
Key Performance Advantages of DEGPE
Six properties define DEGPE's competitive position - the only propyl glycol ether that combines a non-flammable flash point (~96 °C) with a non-Repr.1B regulatory profile, a high boiling point (208–218 °C), and full water miscibility. It occupies a uniquely favorable position between the faster-evaporating EGPE (flammable) and the slower-evaporating DEGBE, with a dual safety advantage neither homolog possesses.
🔥 Non-Flammable - Flash Point ~96 °C
DEGPE's flash point of ~96 °C exceeds the GHS Class 3 flammable liquid threshold (<60 °C) by a wide margin, classifying it as non-flammable at ambient temperature. This eliminates explosion-proof electrical equipment requirements in storage areas, removes ATEX zone compliance obligations, simplifies hazard labeling for professional and consumer products, reduces fire insurance premiums, and enables use in heated cleaning equipment at elevated temperatures without flammability risk. No DG classification required - standard non-DG sea, air, and road freight at substantially lower logistics cost than EGPE (Class 3, UN 3272) or EGEE (Class 3, UN 1171). A decisive advantage in manufacturing facilities and warehouses seeking to reduce flammable solvent inventory.
✅ Non-Repr.1B - EU Co-Formulant Eligible Under 1107/2009
DEGPE carries no reproductive toxicant classification (no Repr. 1B/2) under EU CLP - distinguishing it from EGME and EGEE (both Repr. 1B, H360D, REACH Annex XVII Entry 30). This makes DEGPE fully eligible as a co-formulant in EU-authorized plant protection products under Regulation (EC) No 1107/2009, where CMR co-formulants including EGME and EGEE face approval restrictions. In consumer and professional coatings, cleaning products, and personal care, no additional Annex XVII risk management measures are required. REACH registered (EC 229-996-3); not SVHC listed; not Prop 65 listed. The combination of non-Repr.1B + non-flammable gives DEGPE one of the most complete safety profiles in the diethylene glycol ether series.
🌡️ High Boiling Point - Maximum Open Time & Low VOC
DEGPE's boiling point of 208–218 °C and near-negligible ambient vapor pressure classify it as a high-boiling, low-volatility solvent - providing maximum open time in waterborne coating systems for polymer coalescence and film leveling, sustained soil-contact time in industrial cleaning baths, and minimal evaporative loss during heated processing. Compared to EGPE (BP 148–153 °C), DEGPE's slower evaporation reduces applicator fatigue, minimizes coating defects from premature flash-off, and lowers VOC emissions intensity in formulations. In hot-tank degreasing baths operating at 60–90 °C, DEGPE remains stable in the liquid phase while EGPE would evaporate and concentrate, shifting bath chemistry and creating inhalation exposure. Potential VOC contribution benefit in regulated coating markets.
🔗 Dual Solvency & Coupling Power
DEGPE's diethylene glycol backbone provides two ether oxygen atoms for enhanced hydrogen bonding and polarity - enabling strong solvency for polar resins, cellulosic materials, and electrolyte systems - while its n-propyl end-group retains sufficient hydrophobicity to dissolve mineral oils, synthetic lubricants, waxes, and lipophilic actives. This amphiphilic coupling character is more potent than either pure polar or pure non-polar solvents: DEGPE bridges aqueous and hydrophobic phases in waterborne coatings, stabilizes EC/SL agrochemical concentrates combining hydrophilic and lipophilic components, and keeps multi-component formulations in a single stable phase across temperature ranges and dilution ratios. Fully miscible with water and most common organic solvents simultaneously.
⚖️ Intermediate Position Between DEGEE and DEGBE
Within the diethylene glycol ether series, DEGPE occupies a precise intermediate position: boiling point (208–218 °C) between DEGEE (194–205 °C) and DEGBE (230–232 °C), with evaporation rate correspondingly faster than DEGBE but slower than DEGEE. This allows formulators to target a drying speed between the two well-established Carbitol series solvents - valuable in coating applications where DEGEE dries slightly too fast or DEGBE slightly too slow, and in production-line industrial cleaning where faster bath turnover than DEGBE provides is needed. The propyl end-group also delivers a solvency character between the more polar DEGEE (ethyl) and the more hydrophobic DEGBE (butyl), enabling fine-tuning of resin compatibility in complex multi-resin coating systems.
🌿 Agrochemical Regulatory Compliance - 1107/2009
DEGPE's non-CMR, non-Repr. status makes it fully eligible as a co-formulant in EU-authorized plant protection products under Regulation (EC) No 1107/2009. EGME and EGEE - the most widely used short-chain E-series co-solvents in crop protection formulations - are subject to restriction or exclusion as co-formulants in EU-registered products due to their Repr. 1B classifications. DEGPE provides comparable dissolution of lipophilic agrochemical actives and emulsification assistance in EC/SL/SC formulations, with a non-CMR status that avoids co-formulant authorization difficulties. Sinolook can supply regulatory support documentation (REACH compliance letter, impurity profile, SDS) for co-formulant authorization submissions to national competent authorities.
📌 EGPE vs DEGPE vs DEGBE - Propyl Glycol Ether Series Comparison
| Property | EGPE (CAS 2807-30-9) | DEGPE (CAS 6881-94-3) | DEGBE (CAS 112-34-5) |
|---|---|---|---|
| Glycol Backbone | Ethylene glycol (1 unit) | Diethylene glycol (2 units) | Diethylene glycol (2 units) |
| Boiling Point | 148–153 °C | 208–218 °C ★ | 230–232 °C |
| Flash Point | ~52 °C (Flam. Liq. 3 ⚠) | ~96 °C (Non-flammable) ✓ ★ | ~78 °C (Combustible) |
| DG Transport | UN 3272 Class 3 PG III ⚠ | Non-DG ✓ ★ | Non-DG ✓ |
| EU Repr. Classification | Not classified ✓ | Not classified ✓ ★ | Not classified ✓ |
| Vapor Pressure | Moderate | Low (faster than DEGBE) | Very Low (slowest) |
| Primary Strength | Fast open time, cleaning | Non-flammable + Non-Repr.1B + high BP ★ | Slowest evaporation, max open time |
Diethylene Glycol Monopropyl Ether Uses & Applications
DEGPE (CAS 6881-94-3) is selected when formulators need the high boiling point and non-flammable safety profile of the Carbitol series with faster evaporation than DEGBE and a propyl end-group solvency character between DEGEE and DEGBE. Its dual non-flammable + non-Repr.1B safety profile is uniquely valuable in agrochemical co-formulation, heated industrial cleaning, and high-boiling waterborne coating applications.
Paints, Coatings & Waterborne Architectural Systems
High-boiling coalescing agent and open-time extender in waterborne latex, acrylic, and alkyd systems - remaining in the coating film well beyond the initial drying phase to plasticize polymer particles and promote chain interdiffusion until full coalescence is achieved. Particularly important in cold-weather application, on low-porosity substrates, and in high-PVC architectural paints. In two-component waterborne polyurethane and epoxy systems, improves resin-crosslinker compatibility, reduces application viscosity, and extends pot life. Non-flammable profile simplifies hazard labeling for professional and consumer coating products. Intermediate open time between DEGEE and DEGBE fills a formulation gap for architectural and industrial maintenance coating lines.
Industrial Cleaning, Hot-Tank Degreasing & Surface Prep
Preferred process solvent in hot-tank immersion degreasing baths (60–90 °C) where DEGPE dissolves cutting oils, hydraulic fluids, metalworking lubricants, and drawing compounds from precision aerospace and automotive metal components while remaining stable in the liquid phase at bath temperatures - unlike lower-boiling EGPE which would evaporate and concentrate. Non-flammable classification eliminates flammability risk in heated bath environments, enabling safer operation and simplified facility compliance. In aqueous hard surface cleaning concentrates, DEGPE serves as the coupling agent maintaining formulation stability across dilution ratios and preventing re-deposition of dissolved soils. Compatible with alkaline builders, surfactants, and chelating agents in industrial cleaning systems. Effective in precision electronics PCB cleaning for flux residue removal.
Agrochemical Formulations - EU 1107/2009 Eligible
Co-solvent and emulsifier aid in EC (emulsifiable concentrate), SL (soluble liquid), and SC (suspension concentrate) formulations of herbicides, fungicides, and insecticides - dissolving highly lipophilic active ingredients and stabilizing emulsions through storage and field-dilution stages. Non-CMR, non-Repr. regulatory status makes DEGPE fully eligible as a co-formulant in EU-authorized plant protection products under EC Regulation 1107/2009, where EGME and EGEE face co-formulant restriction due to Repr. 1B classification. Sinolook provides REACH compliance letters, impurity profiles, and SDS documentation for customers' co-formulant authorization submissions to national competent authorities. Improves spray wetting, penetration, and rainfastness on crop surfaces. Non-flammable handling improves safety in agrochemical blending facilities.
Pharmaceuticals & Topical Drug Delivery
Co-solvent and skin penetration enhancer for poorly water-soluble APIs in topical gels, creams, ointments, and transdermal delivery systems. Enhances apparent solubility of lipophilic active ingredients in aqueous formulation matrices, enabling higher active loading in water-based topical products. Moderate penetration-enhancing activity attributed to disruption of stratum corneum ordered lipid bilayer structure improves transdermal flux of co-formulated APIs in anti-inflammatory, antifungal, and analgesic dermatological formulations. Favorable safety profile and absence of Repr. classification support consideration as pharmaceutical excipient under ICH Q3C Class 3 solvent guidelines. High-purity grade (≥99.5%) available for pharmaceutical and advanced cosmetics applications.
Personal Care & High-Performance Cosmetics
Solubilizer, humectant, and coupling agent in premium skin care, hair care, and nail care products. Dissolves both hydrophilic cosmetic actives and lipophilic fragrance and oil components in a single aqueous phase, enabling clear, single-phase serum and toner formulations with high active ingredient concentrations. Higher molecular weight vs. shorter glycol ethers delivers a heavier, more substantive skin feel and enhanced humectant performance - valued in rich moisturizers, intensive hair masks, and leave-in conditioning treatments. Compatible with the full range of anionic, nonionic, and cationic surfactants, polyols, and film-forming polymers. EU cosmetics regulatory acceptance for propyl glycol ether class; INCI compliant.
Chemical Synthesis & Propyl Carbitol Acetate Intermediate
High-boiling reaction solvent in specialty ester and surfactant synthesis, polymer processing, and specialty chemical production - boiling point of 208–218 °C enables elevated-temperature synthesis without pressure vessels. Chemical precursor to Propyl Carbitol Acetate (Diethylene Glycol Monopropyl Ether Acetate, CAS 20706-25-6) - esterification with acetic acid yields a very slow-evaporating, moderately polar solvent for high-performance industrial and automotive refinishing coating systems requiring maximum open time and gloss. Sinolook is developing supply capability for Propyl Carbitol Acetate as a companion product; contact our sales team for current availability. Also used as carrier solvent in hydraulic fluids and metalworking fluid formulations requiring non-flammable, water-miscible systems with good lubricity.
Electronics & Precision Cleaning
Process solvent in photoresist strippers and PCB flux removers where high boiling point and low vapor pressure prevent premature evaporation during elevated-temperature cleaning operations. Broad materials compatibility with FR-4, polyimide, and most common encapsulant materials enables effective soil removal without substrate damage or residue formation. Compatible with aqueous rinse stages for rinsable cleaning formulations in spray-in-air and immersion cleaning equipment. Low VOC contribution at ambient temperature supports environmental compliance in electronics manufacturing facility solvent abatement programs. Non-flammable at ambient temperatures eliminates explosion and fire risk in heated cleaning baths and spray cleaning equipment.
Technical Specifications & COA
Sinolook's Diethylene Glycol Monopropyl Ether is manufactured under strict quality control with every production batch tested against the parameters below. A full Certificate of Analysis (COA), DEGPE SDS / MSDS (GHS-compliant, multi-language), and Technical Data Sheet (TDS) are provided with every shipment. Higher-purity grade (≥99.5%) available for pharmaceutical, cosmetics, and specialty applications on request.
DEGPE (Propyl Carbitol / 2-(2-Propoxyethoxy)ethanol, CAS 6881-94-3) - Quality Specifications & Typical COA
| Parameter | Specification | Typical COA Result |
|---|---|---|
| Appearance | Clear, colorless liquid, free of suspended matter | Clear colorless liquid |
| Purity (GC), wt% | ≥99.0% | 99.1 – 99.5% |
| Water Content (Karl Fischer), wt% | ≤0.15% | 0.05 – 0.10% |
| Density (20 °C), g/cm³ | 0.981 – 0.989 | 0.984 – 0.986 |
| Boiling Point, °C | 208.0 – 218.0 °C (1 atm) | 210 – 216 °C |
| Flash Point (closed cup), °C | ≥90 °C | ~96 °C |
| Refractive Index (20 °C, n20/D) | ~1.432 | 1.431 – 1.433 |
| Color (Pt-Co / APHA) | ≤15 | ≤10 |
| Viscosity (25 °C), mPa·s | ~3.5 | 3.2 – 3.8 |
| Acidity (as acetic acid), wt% | ≤0.005% | <0.002% |
| Residue on Evaporation, wt% | ≤0.01% | <0.005% |
Higher-Purity Grade (≥99.5%): Available for pharmaceutical excipient, advanced cosmetics, and specialty applications requiring enhanced analytical documentation. Packaging: 200 kg iron drums; 1,000 kg IBC tanks; bulk ISO tank containers. Transport: Non-DG classification - standard sea, air, and road freight without DG surcharges. Companion product Propyl Carbitol Acetate (CAS 20706-25-6) in development - contact sales@sinolookchem.com for availability. Full E-series and Carbitol-series glycol ether portfolio available; consolidated shipment discounts apply.
DEGPE SDS, Safety & Regulatory
Diethylene Glycol Monopropyl Ether combines the two most commercially valuable safety properties in the propyl glycol ether family: not a flammable liquid (flash point ~96 °C - above the GHS <60 °C threshold) and not a reproductive toxicant (no Repr. 1B/2 - unlike EGME and EGEE). No DG transport classification required. No REACH Annex XVII consumer restriction. Not SVHC listed. Not Prop 65 listed. DEGPE SDS / MSDS are GHS-compliant and available in English, German, French, Spanish, and Chinese.
| Safety / Regulatory Parameter | Value / Notes |
|---|---|
| GHS Classification | Eye Irrit. 2 (H319); Skin Irrit. 2 (H315) - not classified as flammable liquid or reproductive toxicant |
| GHS Signal Word | WARNING |
| Flash Point & Transport | ~96 °C (cc) - not classified as flammable liquid under GHS; no UN / DG classification required; standard non-DG sea, air, and road freight; no ATEX requirements in storage |
| Reproductive Toxicity | Not classified - no Repr. 1B/2 designation; no REACH Annex XVII consumer product restriction; no CMR hazard designation |
| EU Agrochemical Status | Not CMR, PBT, or vPvB; fully eligible as co-formulant in EU plant protection products under Regulation (EC) No 1107/2009; supporting documentation available for national competent authority submissions |
| REACH / SVHC Status | REACH registered (EC 229-996-3); Not SVHC listed; No Annex XVII restriction; REACH compliance letter available on request |
| US / California | Not listed under California Prop 65; TSCA compliance confirmation available; standard OSHA HazCom applies |
| PPE Recommended | Safety glasses; nitrile or neoprene gloves; avoid prolonged skin and eye contact; adequate general ventilation; no special respiratory protection required under normal ambient handling (low vapor pressure) |
| Storage | Cool, dry, well-ventilated area; 5–40 °C; sealed containers; no explosion-proof electrical equipment required; segregate from strong oxidizers, concentrated acids, reactive alkali metals; shelf life 24 months |
| Request SDS / COA / TDS | sales@sinolookchem.com or WhatsApp +86 134 0071 5622 - issued within 24 hours |
DEGPE Price, Packaging & B2B Supply
Diethylene glycol monopropyl ether price depends on grade, order volume, packaging, and Incoterms. As a direct manufacturer, Sinolook eliminates distributor markups with transparent volume-tiered pricing. Non-DG transport classification reduces freight cost vs. EGPE (Class 3 DG). Request a customized DEGPE price quote - 24-hour response guaranteed.
| Order Volume | Packaging | Included Services |
|---|---|---|
| 0.5 – 5 kg (Sample) | Sample bottle / small drum | COA, DEGPE SDS/MSDS, TDS; nominal charge refundable against first commercial order |
| 1 MT – 20 MT (Regular) | 200 kg iron drums / 1,000 kg IBC tanks | Volume discount; non-DG standard freight; dedicated account manager; REACH and regulatory documentation |
| 20 MT+ (Bulk / Contract) | IBC tanks / ISO tank containers (non-DG) | Best DEGPE price; fixed-price annual supply contract; reserved production capacity; SGS/Intertek inspection available |
📦 MOQ
1 MT standard (≥99.0%). High-purity ≥99.5% on request. Samples 0.5–5 kg refundable against first commercial order.
🚢 Delivery Terms
EXW, FOB, CFR, CIF, DAP, DDP. Ex-Shanghai, Tianjin, Qingdao, Guangzhou, Ningbo. Non-DG freight - lower cost vs. flammable glycol ethers.
⏱ Lead Time
Price quote within 24 hours. Production and export: 10–15 business days. Expedited available. Shelf life 24 months.
🔍 Inspection
SGS, Intertek, or Bureau Veritas at buyer's cost. Notify at order placement. Pre-shipment COA issued for all orders.
- ✓ ISO 9001 & ISO 14001 certified - every batch QC tested for GC purity, Karl Fischer, density, refractive index, color, flash point, and viscosity
- ✓ Full export documentation: COA, DEGPE SDS/MSDS (multi-language), TDS, Certificate of Origin, packing list, commercial invoice, bill of lading (non-DG)
- ✓ REACH compliance letter (EC 229-996-3), SVHC declaration, non-CMR confirmation, EU 1107/2009 co-formulant eligibility letter, and Prop 65 / TSCA statements available
- ✓ Agrochemical co-formulant regulatory support: impurity profile data, REACH registration status, SDS for national competent authority authorization submissions
- ✓ Companion product Propyl Carbitol Acetate (CAS 20706-25-6) in development - contact for current availability status
- ✓ Full glycol ether portfolio: EGPE · DEGPE · DEGBE · DEGEE · DEGMME - consolidated shipments available; technical series selection guidance provided
Frequently Asked Questions About DEGPE
Technical and commercial questions about Diethylene Glycol Monopropyl Ether / Propyl Carbitol (CAS 6881-94-3) from B2B buyers in coatings, agrochemicals, industrial cleaning, and specialty chemical industries.
What is Diethylene Glycol Monopropyl Ether (DEGPE) and what is it used for?
Diethylene Glycol Monopropyl Ether (DEGPE, CAS 6881-94-3) - commercially known as Propyl Carbitol or 2-(2-Propoxyethoxy)ethanol - is a high-boiling (208–218 °C), non-flammable (FP ~96 °C), non-Repr.1B diethylene glycol ether solvent. It occupies the intermediate position between DEGEE (ethyl, faster) and DEGBE (butyl, slower) in the Carbitol series. Primary uses: coalescing agent and open-time extender in waterborne latex, acrylic, and polyurethane coatings; hot-tank industrial degreasing at elevated temperatures without flammability risk; non-CMR co-formulant in EU-authorized crop protection products (EC 1107/2009); pharmaceutical co-solvent and skin penetration enhancer in topical formulations; humectant and solubilizer in personal care; PCB and electronics precision cleaning; and high-temperature reaction solvent and Propyl Carbitol Acetate precursor.
What are the synonyms and CAS number for DEGPE?
The DEGPE CAS number is 6881-94-3 (EC 229-996-3). Synonyms include Propyl Carbitol (most common trade name), 2-(2-Propoxyethoxy)ethanol (IUPAC), Diglycol Monopropyl Ether, and n-Propyl Carbitol. The abbreviation DEGPE (Diethylene Glycol monoProPyl Ether) is the most precise shorthand, preferred over DGPE or DGMPE. Always use CAS 6881-94-3 to distinguish from DEGEE (ethyl, CAS 111-90-0 / Carbitol), DEGMME (methyl, CAS 111-77-3), DEGBE (butyl, CAS 112-34-5 / Butyl Carbitol), or EGPE (shorter-chain ethylene glycol propyl ether, CAS 2807-30-9).
How does DEGPE compare to DEGBE in coatings applications?
DEGPE and DEGBE (CAS 112-34-5, Butyl Carbitol) are both non-flammable, non-Repr.1B high-boiling coalescing solvents in the Carbitol series. The key difference is evaporation rate: DEGPE (BP 208–218 °C) evaporates faster than DEGBE (BP 230–232 °C) - providing shorter open time and faster set-to-touch, which is advantageous in production-line coating applications where faster handling throughput is needed, or in brushable coatings where slightly faster wet-edge closure reduces lap marks. DEGBE's slower evaporation is preferred in premium high-gloss architectural and decorative finishes requiring maximum flow and leveling time. DEGPE's propyl end-group also delivers slightly higher polarity vs. DEGBE's butyl end-group - potentially improving solvency for more polar resin systems. Both are available from Sinolook; contact our technical team for formulation guidance.
Is DEGPE eligible as a co-formulant in EU crop protection products?
Yes. DEGPE is not classified as CMR, PBT, or vPvB and is not included on any EU restricted co-formulant list under Regulation (EC) No 1107/2009 on Plant Protection Products - making it fully eligible as a co-formulant in EU-authorized plant protection products, subject to standard product-level toxicological and ecotoxicological assessment. This contrasts with EGME and EGEE, whose Repr. 1B classifications trigger co-formulant restrictions in EU-registered crop protection products. Sinolook provides full regulatory support documentation for co-formulant authorization submissions: REACH registration status (EC 229-996-3), REACH compliance letter, analytical SDS, impurity profile data, and non-CMR declaration - contact sales@sinolookchem.com for the documentation package.
What is Propyl Carbitol Acetate, and does Sinolook supply it?
Propyl Carbitol Acetate (Diethylene Glycol Monopropyl Ether Acetate, CAS 20706-25-6) is produced by esterification of DEGPE with acetic acid - a very slow-evaporating, moderately polar solvent used in high-performance industrial and automotive refinishing coating systems requiring maximum open time and excellent gloss. Sinolook is actively developing supply capability for Propyl Carbitol Acetate as a companion product to DEGPE. Contact our sales team at sales@sinolookchem.com for current availability status and specifications. DEGPE and DEGPEA (Propyl Carbitol Acetate) are frequently formulated together in multi-solvent blend systems to engineer a precisely targeted evaporation profile.
How do I get a DEGPE price quote or sample?
Qualification samples (0.5–5 kg) are available at a nominal charge refundable against the first commercial order. Standard grade ≥99.0%; high-purity ≥99.5% available on request.
- Step 1: Contact us with requirements - grade (≥99.0% or ≥99.5%), quantity, packaging, delivery terms (FOB/CIF/DDP), destination port, and any regulatory documentation needs (co-formulant support, pharma GMP, etc.).
- Step 2: Receive a complete DEGPE price quote within 24 hours - unit price, non-DG packaging, freight estimate, lead time (10–15 days), and documentation scope.
- Step 3: Request qualification samples for formulation or regulatory testing. Specify application area for targeted technical recommendations.
- Step 4: Confirm order - Sinolook handles production, standard non-DG packaging, full export documentation, and freight booking end-to-end.
- Step 5: Receive shipment with complete documentation. Agrochemical co-formulant regulatory package, REACH compliance letters, and third-party inspection (SGS/Intertek/BV) available on request.
Hot Tags: diethylene glycol monopropyl ether, China diethylene glycol monopropyl ether manufacturers, suppliers, monopropyl
