MoDTP

Send Inquiry
MoDTP
Details
Diakyl Dithiophosphate Molybdenum, commonly abbreviated as MoDTP, is one of the most important multifunctional additives used in high-performance engine oils, industrial lubricants, hydraulic fluids, and gear oils. With the registered number CAS 9006-98-0, MoDTP is widely recognized in the global lubricant industry for its strong anti-oxidation capacity, excellent anti-wear protection, and outstanding friction-modification capabilities.
Category
Anti-Wear Agent
Share to
Description
⚙️

Lubricant Additives - Friction Modifiers Series: MoDTP (Molybdenum Dialkyldithiophosphate, CAS 9006-98-0) opens the Friction Modifiers subcategory - the most mechanistically complex additive class in the Sinolook range. Unlike single-function additives (ZDDP = antiwear, phenolic/amine AOs = antioxidants), MoDTP is a true multifunctional additive delivering three simultaneous performance functions: (1) friction modification - in-situ formation of MoS₂ lamellar nanofilms that reduce boundary friction coefficient to μ < 0.07, directly improving fuel economy by 1–3%; (2) anti-wear protection - dithiophosphate ligands form chemisorbed tribochemical films on ferrous surfaces, reducing scuffing and pitting; (3) antioxidation - Mo and DTP moieties inhibit oxidative chain reactions and hydroperoxide decomposition. Critically: MoDTP contains molybdenum (Mo), sulphur (S), and phosphorus (P) - it contributes to the lubricant's SAPS budget (unlike SAPS-free phenolic and amine AOs). However, at typical treat rates (0.05–0.2 wt%), MoDTP's P contribution is 5–20× smaller than that of ZDDP, enabling significant friction-modification benefit within tight phosphorus budgets. Sinolook FM Series: MoDTP CAS 9006-98-0 (this) · MoDTC · other FM grades.

★★★ MULTIFUNCTIONAL: Friction Modifier + Anti-Wear + Antioxidant · MoS₂ Tribofilm · Mo 5–10% · CAS 9006-98-0 · Organomolybdenum · ⚠ Contains P & S (SAPS contribution) · FP ≥150°C · Engine Oil · Gear Oil · Aviation · Fuel Economy +1–3%

MoDTP - Molybdenum Dialkyldithiophosphate

MoDTP  /  Mo-DTP  /  Dialkyl Dithiophosphate Molybdenum  /  二烷基二硫代磷酸钼  /  CAS 9006-98-0  /  Organomolybdenum FM  /  Dark Green–Brown Liquid  /  Mo 5–10%

CAS Number 9006-98-0
Full name Molybdenum, bis[O,O-di(C₄H₉-alkyl) phosphorodithioato-S,S']-  /  Molybdenum bis(dibutyldithiophosphate) - commercial C4-grade; C6, C8, and mixed-alkyl grades also exist under same CAS family
Structure As shown in image: Mo(IV) central atom coordinated by two bidentate dialkyldithiophosphate ligands through S–Mo–S and O–Mo–O bridging bonds. Structural formula: Mo[S₂P(OR)₂]₂ where R = alkyl (C₄–C₈ range). The image shows the C₄H₉ (n-butyl / isobutyl) grade - same structural principle as ZDDP ligands (Zn-DTP → Mo-DTP) but with Mo replacing Zn, giving completely different tribochemistry: ZDDP forms zinc polyphosphate glass film (antiwear); MoDTP decomposes to MoS₂ lamellar nanocrystals (friction reduction). 3D model colours: grey = Mo; yellow = S; red = O; black = C (P atoms between C and S in the ligand arms)
vs MoDTC ⚠ MoDTP (this) contains phosphorus (P in DTP ligand) - contributes to SAPS P budget. MoDTC (Molybdenum DialkylDithioCarbamate) contains no P (DTC ligand: S₂CN- vs S₂PO-). Both form MoS₂ tribofilm and deliver friction reduction; MoDTC is preferred in P-restricted formulations (ACEA C1 ≤0.05% P). MoDTP is preferred where some P budget is available and the AW + AO contribution from the DTP moiety is additionally desired.
★ Three functions
① FRICTION MODIFIER - MoS₂ tribofilm, μ < 0.07, +1–3% fuel economy ② ANTI-WEAR - DTP chemisorbed film, scuffing/pitting protection ③ ANTIOXIDANT - radical scavenging + ROOH decomposition (Mo + DTP)
★ SAPS Status ⚠ Contains Mo, P, S - contributes to SAPS (all three parameters)

Mo contributes to sulphated ash (as MoO₃, D482); P contributes to phosphorus content (D4951); S contributes to sulphur content (D4294). However: at typical treat rate 0.1 wt%, Mo ash contribution ~0.001–0.002%, P contribution ~0.004–0.006%, S contribution ~0.01–0.02% - all far below ACEA C1 limits (ash ≤0.5%, P ≤0.05%, S ≤0.2%). MoDTP's SAPS impact is minimal vs ZDDP (typically 15–20× lower P contribution at equal FM benefit), enabling use in all ACEA C1–C5 and API SP/FA-4 formulations at recommended treat rates.

Appearance Dark green to dark brown viscous liquid; colour from Mo(IV) d-electron transitions and DTP ligand conjugation - the distinctive dark green/olive colour is characteristic of Mo-DTP complexes; not an impurity indicator. Fully soluble in mineral and synthetic base oils without settling.

MoDTP Triple Mechanism - MoS₂ Tribofilm Formation, DTP Anti-Wear Film, and Antioxidation Pathways

MoDTP (Molybdenum Dialkyldithiophosphate, CAS 9006-98-0) is the industry's premier organomolybdenum multifunctional additive - the only common lubricant additive that simultaneously reduces friction, prevents wear, and inhibits oxidation through three mechanistically distinct pathways. The molecule is structurally analogous to ZDDP (Zinc Dialkyldithiophosphate) - replacing the zinc centre with molybdenum - but this single substitution changes the tribochemistry completely. Where ZDDP deposits an amorphous zinc polyphosphate glass pad (excellent antiwear, zero friction reduction), MoDTP undergoes thermally and tribologically activated decomposition to form crystalline MoS₂ nanolamellae - the same lamellar crystal structure as solid lubricant MoS₂ (molybdenite), but generated in-situ from solution within the lubricant.

⚙️ MECHANISM ① - Friction Modification: In-Situ MoS₂ Tribofilm Formation
Step 1 - Thermal/tribological decomposition

Under boundary/mixed lubrication conditions (temperature 150–300°C at asperity contact points; shear stress up to 1 GPa), MoDTP undergoes S–Mo–S bond cleavage. The liberated Mo species (Mo(IV) and/or Mo(VI) oxides) are converted on the ferrous contact surface through a series of tribochemical reduction reactions to Mo(IV) disulphide, MoS₂. This in-situ generation distinguishes organomolybdenum FM from solid MoS₂ greases - the nanolamellar MoS₂ is generated at exactly the location and temperature where it is needed.

Step 2 - MoS₂ lamellar nanofilm: μ < 0.07

MoS₂ has the hexagonal lamellar crystal structure (space group P6₃/mmc) - S–Mo–S sandwiched layers held together by weak van der Waals forces between the outer sulphur planes. The interlayer shear strength is extremely low (~0.1 MPa) vs the Mo–S covalent bond strength within the layer (~420 kJ/mol). This allows layers to slide over each other with near-zero resistance: boundary friction coefficient μ = 0.03–0.07 (vs μ = 0.10–0.15 for steel-on-steel without FM, and μ = 0.08–0.12 for ZDDP-only film). The MoS₂ nanofilm is continuously replenished from MoDTP solution as it is consumed - unlike pre-applied solid MoS₂ which depletes without replenishment.

Fuel economy benefit (ASTM D5182, Sequence VIE, Toyota SL/GX test): MoDTP at 0.05–0.15 wt% in PCMO engine oil consistently demonstrates +1–3% fuel economy improvement vs equivalent oil without MoDTP - measured by ASTM Sequence VIE fuel economy test and standardised EC/MC engine friction rig tests. Mechanism: reduced piston ring / cylinder wall friction and cam/follower boundary friction in the critical mixed-lubrication regime (engine cold start to operating temperature). OEM fuel economy claims (Toyota 0W-20, Honda GN oil) routinely include MoDTC/MoDTP as key specification-defining additives.
🛡️ MECHANISM ② - Anti-Wear: DTP Chemisorbed Tribochemical Film

The dithiophosphate (DTP) ligands in MoDTP provide anti-wear function by the same mechanism as ZDDP - thermally and tribologically activated chemisorption on iron/steel surfaces, forming a short-chain zinc-free polyphosphate film. This DTP-derived tribochemical film:

Sacrificial polyphosphate

Forms a ~5–30 nm thick amorphous phosphate layer on the contact surface; softer than steel but harder than the lubricant film - absorbs asperity contact energy and prevents direct metal-to-metal contact

Synergy with ZDDP

MoDTP DTP film + ZDDP zinc polyphosphate glass work in combination - the MoDTP film provides the lubrication layer, the ZDDP film provides the thicker load-bearing pad. Mixed MoDTP+ZDDP formulations show 40–60% better wear scars (WSD, ASTM D4172) than either alone at equivalent SAPS contribution

Lower P vs ZDDP

MoDTP at 0.1 wt% contributes ~0.004–0.006% P. ZDDP at 0.8 wt% contributes ~0.08–0.10% P. To achieve equivalent AW protection using MoDTP + reduced ZDDP vs ZDDP-only, total P can be reduced by 20–30% while maintaining or improving AW - critical for ACEA C2/C3 (P ≤0.08%) formulations

🔬 MECHANISM ③ - Antioxidation: Mo Redox Cycling + DTP Radical Scavenging
Mo redox cycling - hydroperoxide decomposition

Mo(IV) in MoDTP is oxidised by lubricant hydroperoxides (ROOH) - the same oxidative species that ZDDP decomposes: Mo(IV) + ROOH → Mo(VI) + RO• + OH•. Unlike ZDDP (one-pass decomposition), Mo has accessible Mo(IV)/Mo(VI) redox couples - the Mo(VI) can be reduced back to Mo(IV) by reducing species in the oil, creating a partial catalytic ROOH decomposition cycle. This is analogous to the amine AO partial regeneration mechanism but operates through a metal-redox pathway rather than an organic radical pathway.

DTP radical scavenging - ROO• chain termination

The dithiophosphate sulphur centres (–P=S, –P–S–) in the DTP ligand can act as H-atom donors toward peroxyl radicals (ROO•) - a mechanism similar to ZDDP's secondary AO function but with Mo enhancing the effectiveness. Combined Mo + DTP antioxidation makes MoDTP effective across both the primary (radical trapping) and secondary (ROOH decomposition) AO pathways simultaneously - genuine dual-function AO activity, unlike simple phenolic AOs (primary only) or ZDDP (predominantly secondary).

Antioxidation synergy in the full additive package: MoDTP + amine AO (NDPA/ADPA) + phenolic ester (L01/L57) + ZDDP creates a four-component system covering all oxidation pathways at all temperatures: phenolic ester (60–150°C radical scavenging) + amine AO (120–200°C+ radical scavenging) + MoDTP (Mo redox cycling, ROOH decomposition, radical scavenging at metal surfaces) + ZDDP (bulk-phase ROOH decomposition). This is the definitive antioxidant stack for API SP and ACEA C3 long-drain engine oils.
MoDTP molybdenum dialkyldithiophosphate molecular structure diagram showing Mo central metal atom coordinated with two DTP ligands through P-S-Mo-S-P and O-Mo-O bonds with C4H9 butyl alkyl chains on each phosphorus highlighted in red S yellow and P coloured skeletal formula plus 3D ball-and-stick model with large grey molybdenum central atom yellow sulfur atoms red oxygen atoms and black carbon atoms, background showing commercial aircraft for aviation lubricants high-speed highway traffic for automotive engine oil and industrial engine components
Structure confirmed (CAS 9006-98-0): Skeletal formula: P (orange) - Mo (white label) - P with S (yellow), O (red), and C₄H₉ (alkyl) arms on each P. 3D model: large grey sphere = Mo (the metal centre); yellow spheres = S (the four sulphur ligand atoms); red spheres = O (the two or four oxygen atoms bridging to Mo/P); black spheres = C (the alkyl chain carbons). The Mo–S coordination bonds (4 bonds: two S–Mo–S from two DTP ligands) are the key structural feature - these bonds cleave first under tribological activation to release reactive Mo species that subsequently form MoS₂ on the metal surface. Background: aircraft (aviation turbine oil), highway traffic (automotive PCMO/HDEO), engine cutaway (valve-train friction reduction).
📋 Physical Properties - MoDTP CAS 9006-98-0
Appearance Dark green to dark brown liquid
★ Mo content 5–10 wt% (ICP-OES or gravimetric)
Flash Point ≥150°C (ASTM D93)
⚠ S content ~8–14% (contributes to oil S)
⚠ P content ~4–6% (contributes to oil P)
KV @40°C (cSt) ~200–800 (grade dependent)
Solubility Complete: mineral (Group I–III), PAO, ester, PAG
Storage temp. 0–40°C, sealed, away from light
Shelf life 24 months sealed
⚠ MoDTP vs MoDTC - Which to Choose?
Property MoDTP (this) MoDTC
Contains P ⚠ Yes (DTP ligand) ✅ No (DTC ligand)
MoS₂ FM performance Equal Equal
AW contribution ✅ Yes (DTP film) Lower
ACEA C1 (P ≤0.05%) Use with care ✅ Preferred
ACEA C2/C3/C5 ✅ Suitable ✅ Suitable

Technical Specification

★ Mo Content
5–10%
ICP-OES or gravimetric
The Mo content directly determines the MoS₂ tribofilm generation capacity and FM performance. Higher Mo = more MoS₂ potential per kg additive. Specify target Mo% on order.
Flash Point
≥150°C
ASTM D93
Note: FP ≥150°C - non-flammable by GHS classification (FP >60°C); no ADR Class 3 restrictions; standard warehouse storage permitted. Lower FP than amine/phenolic AOs due to lower MW alkyl chains.
⚠ P Content
~4–6%
ICP-OES / D4951
At 0.1 wt% treat rate: ~0.004–0.006% P in finished oil - approx. 15–20× lower P contribution vs ZDDP at functional treat rate. ACEA C1 (≤0.05% P): use MoDTC instead. ACEA C2/C3/SP (≤0.08% P): MoDTP 0.1–0.2 wt% acceptable with reduced ZDDP.
⚠ S Content
~8–14%
D4294 / ICP
At 0.1 wt% treat rate: ~0.008–0.014% S contribution. Additive S contribution from MoDTP is minor vs base oil S (Group I: 0.3–0.5% S; Group II/III: <0.03% S). Monitor total formulation S when blending with Group I mineral oil.
Parameter Specification Test Method Technical Note
Appearance Dark green to dark brown liquid Visual Dark olive/bottle-green at fresh delivery; characteristic of Mo(IV) d-d electronic transitions. Deep brown indicates higher Mo concentration grades. Not an impurity indicator - colour does not affect performance.
★ Mo Content 5–10 wt% ICP-OES (ASTM D5185 / D6443) Primary performance parameter - Mo content determines MoS₂ formation capacity and FM performance. Specify target Mo% range on purchase order. Higher Mo grades preferred for low treat-rate applications (aviation, premium synthetics).
Flash Point ≥ 150°C ASTM D93 (PM) ≥150°C is above the GHS flammable liquid threshold (60°C); non-flammable; no ADR Class 3 transport restriction. Lower than amine/phenolic AOs (≥200°C) due to shorter C4 alkyl chains - store at recommended 0–40°C.
⚠ Phosphorus content ~4–6 wt% ICP-OES (ASTM D5185) P contributes to finished oil phosphorus (ACEA/API limit). At 0.1 wt% treat: +~0.004–0.006% P. Incorporate into P budget alongside ZDDP P contribution. For ACEA C1 (P ≤0.05%): switch to MoDTC (P-free). For C2/C3 (P ≤0.08%): MoDTP 0.1–0.2 wt% acceptable with appropriately reduced ZDDP.
⚠ Sulphur content ~8–14 wt% ASTM D4294 / ICP At 0.1 wt% treat: +~0.008–0.014% S. Minor vs base oil S for Group I (0.3–0.5% S); significant relative to Group III base oil S (<0.03%). Include in ACEA S budget calculation (ACEA C1/C2 ≤0.2% S, C3 ≤0.3% S).
KV @40°C (cSt) ~200–800 ASTM D445 Grade dependent. High viscosity liquid - standard drum or IBC with heating coil/jacket for transfer; dissolves readily in base oil at 40–60°C.
Water content ≤ 0.1% Karl Fischer Keep sealed; moisture promotes hydrolysis of Mo–S and P–S bonds in storage → reduced Mo content and amine value equivalent; N₂ blanket for open IBCs recommended
Packaging 200 kg iron drum · 1000 L IBC · ISO tank (bulk) - Shelf life 24 months sealed; store 0–40°C, dry, away from light; avoid strong acids/oxidisers in storage proximity
COA per lot: Mo content (ICP, target range) · Appearance · S content · P content · Flash point (≥150°C) · KV @40°C · Water (KFT ≤0.1%). TDS and SDS (GHS) provided per shipment. Target Mo% specification and SAPS impact calculation sheet available on request.

Applications & Dosage Guidance

1. PCMO Engine Oils - Fuel Economy & Friction Reduction

0.05–0.15 wt% +1–3% fuel economy

MoDTP at 0.05–0.15 wt% is the primary friction modifier for ILSAC GF-6 and API SP passenger car engine oil formulations targeting fuel economy improvement. At this treat rate, MoDTP contributes negligible P (~0.003–0.008%) - compatible with the most stringent P budgets when combined with ZDDP at ≤0.8 wt%. The MoS₂ tribofilm generated during engine operation reduces piston ring / cylinder wall boundary friction during cold start (first 5 minutes of operation when hydrodynamic lubrication is incomplete) and cam follower mixed-lubrication friction throughout the operating cycle. ASTM Sequence VIE fuel economy tests consistently demonstrate +1.5–2.5% fuel economy improvement (FEI) in SAE 0W-20 and 0W-16 PCMO containing 0.08–0.12 wt% MoDTP vs the same base formulation without MoDTP. For Toyota 0W-20, Honda GN specification, and Mercedes-Benz MB 229.71 fuel economy engine oils, organomolybdenum FM is a specification-defining component. Combined with NDPA 0.2–0.3 wt% (amine AO) + L01-type 0.3–0.4 wt% (phenolic AO), the full four-component stack delivers API SP + ACEA C3 approval performance.

2. HDEO Heavy-Duty Diesel & Gear Oils

0.1–0.2 wt% AW + AO + FM triple

In heavy-duty diesel engine oils (API CK-4, FA-4, ACEA E6/E9) at extended drain intervals (60,000–100,000 km), MoDTP at 0.1–0.2 wt% contributes all three functional benefits simultaneously: (1) FM benefit in turbocharger bearings and high-load cam contact zones; (2) AW benefit supplementing ZDDP in high-load valve-train contacts where ZDDP film replenishment may lag at extended-drain end of life; (3) AO benefit from Mo redox cycling, extending the oxidation resistance of the lubricant at high sump temperatures (140–160°C HDEO). For industrial gear oils (AGMA EP grades, DIN 51517-3 CLP), MoDTP at 0.1–0.2 wt% in combination with EP sulphur-phosphorus additives reduces micropitting (ASTM D6138 DGMK procedure) and improves gear efficiency by 0.5–1.5% - documented in FZG gear efficiency test rigs. Not recommended as sole AW additive in gear oils - combine with ZDDP or EP additive.

3. Hydraulic & Compressor Oils

0.05–0.15 wt% Pump efficiency

In hydraulic oils (DIN 51524-2/3 HLP/HVLP, Denison HF-0/2, Parker Hannifin fluidpower specifications) and industrial compressor oils (DIN 51506 VDL, ISO 6521), MoDTP at 0.05–0.15 wt% reduces hydraulic pump internal friction and improves volumetric and mechanical efficiency of axial-piston and vane pumps - measurable as 0.5–2% improvement in overall pump efficiency at operating pressure. For high-pressure hydraulic systems (>350 bar), the AW function of MoDTP's DTP moiety supplementing ZDDP prevents pump slipper-plate and barrel wear, extending pump service life. In compressor oils, MoDTP's low volatility (≤0.1% Noack at typical treat rate) and the high-temperature stability of the MoS₂ tribofilm ensure no additive flashing or deposit formation on compressor discharge valves - a failure mode common with lower-stability friction modifiers.

4. Aviation Lubricants & Metalworking Fluids

0.05–0.2 wt% High-load contact

In aviation and aerospace lubrication - aircraft piston engine oils (SAE J1966, MIL-W-6082), turboprop reduction gear oils, and helicopter transmission oils - MoDTP at 0.05–0.15 wt% provides FM and AW benefits in high-load gear and spline contacts without the DPF compatibility concern relevant to automotive engines (aviation engines lack diesel particulate filters). The in-situ MoS₂ tribofilm is particularly effective in the high-load, moderate-speed sliding contacts of geared aircraft transmissions where hydrodynamic lubrication is insufficient. For metalworking and cutting fluids (MWF, water-based and neat cutting oil), MoDTP at 0.1–0.2 wt% in the neat oil phase improves tool life and reduces cutting force - the MoS₂ film on the cutting tool face and workpiece reduces friction at the chip–tool interface, reducing tool wear and improving surface finish (Ra) on machined components.

Application Treat Rate (wt%) P contribution (wt% in oil) Key Performance / Standard
PCMO 0W-20/0W-30 fuel economy 0.05–0.15 ~0.002–0.009% ILSAC GF-6, API SP; Seq. VIE +1.5–2.5% FEI; Toyota 0W-20, MB 229.71
HDEO long-drain CK-4/E6/E9 0.1–0.2 ~0.004–0.012% API CK-4/FA-4, ACEA E6/E9; FM + AW + AO triple benefit; RULER-monitored drain
Industrial gear oil (AGMA/DIN 51517) 0.1–0.2 ~0.004–0.012% DIN 51517-3 CLP; ASTM D6138 micropitting; FZG gear efficiency +0.5–1.5%
Hydraulic oil (HLP/HVLP) 0.05–0.15 ~0.002–0.009% DIN 51524-2/3; Denison HF-0/2; pump efficiency +0.5–2.0%
Aviation / aerospace piston/gear 0.05–0.15 ~0.002–0.009% SAE J1966; high-load gear/spline FM + AW; no DPF compatibility concern
Metalworking fluid (neat cutting oil) 0.1–0.2 ~0.004–0.012% Tool life extension; reduced cutting force; improved Ra surface finish; chip–tool friction reduction

Frequently Asked Questions

Q: MoDTP contains phosphorus. How does it fit within ACEA low-SAPS formulations?

The key insight is that MoDTP's P contribution at typical treat rates (0.05–0.15 wt%) is 5–20× smaller than ZDDP's P contribution at the treat rates needed for anti-wear protection. A typical ZDDP treat rate of 0.8–1.0 wt% (in ACEA C3 engine oil) contributes ~0.08–0.10% P to the finished oil - already at or near the ACEA C3 limit of 0.08%. MoDTP at 0.10 wt% adds only ~0.004–0.006% P - essentially negligible within the formulation P budget. The standard ACEA C3 formulation approach is: ZDDP at 0.6–0.8 wt% (reduced from legacy 1.0 wt%) + MoDTP 0.08–0.12 wt% - this achieves better overall antiwear performance than ZDDP-only (due to MoS₂ + DTP combined film) while keeping total P well within the 0.08% limit. For ACEA C1 (P ≤0.05%): the strict P limit makes MoDTP use difficult unless ZDDP is drastically reduced - for these formulations, MoDTC (our P-free organomolybdenum grade) is the preferred alternative, delivering equivalent MoS₂ FM performance with zero P contribution.

Q: Does MoDTP interact with ZDDP? Is there any antagonism or synergy?

The MoDTP + ZDDP interaction is generally strongly synergistic for antiwear performance, with some nuance. The MoS₂ tribofilm from MoDTP and the zinc polyphosphate glass pad from ZDDP co-exist in the tribochemical contact film as distinct layers - MoS₂ acting as the low-friction sliding layer and the polyphosphate providing the load-bearing anti-seizure layer. The combined film shows 40–60% lower wear scar diameter (ASTM D4172 four-ball test) vs either additive alone at equivalent total SAPS contribution - a well-documented synergistic anti-wear interaction. For antioxidation, both MoDTP (Mo redox, DTP radical scavenging) and ZDDP (ROOH decomposition) work via complementary mechanisms with no reported antagonism. The only potential interaction concern is formulation stability: at very high combined concentrations of MoDTP + ZDDP in the same blend (uncommon in practice), some Mo-Zn complex formation is possible in storage at elevated temperatures. Standard treat rates (MoDTP ≤0.15 wt% + ZDDP ≤1.0 wt%) are confirmed stable for 24 months at 0–40°C.

Q: Why does MoDTP lubricant oil appear dark/discoloured, and is the MoS₂ film visible as a deposit?

The dark green-brown colour of the neat MoDTP additive is inherent to the Mo(IV) d-d electronic transitions and does not significantly affect the finished lubricant colour at typical treat rates (0.05–0.15 wt% in a light-coloured base oil produces a slightly darker amber tint, not a dramatic colour change). The MoS₂ tribofilm formed during engine operation is a nanometre-scale (2–20 nm thick) conformal coating on metal contact surfaces - it is not visible as a bulk deposit and does not accumulate as a film detectable by conventional filtration. In used oil analysis, Mo can be tracked by ICP spectrometry (D5185 used oil metals test) - a measurable decline in Mo concentration in used oil over the drain interval indicates MoS₂ tribofilm formation (Mo deposition on surfaces), consistent with the additive performing its intended function. This is an accepted method of confirming MoDTP activity in field-trial used oil analysis programs.

Technical & Regulatory References

📐
Key Test Methods
ICP-OES D5185 / D6443 (Mo content) · D93 (FP ≥150°C) · D445 (KV @40°C) · D4294 (S) · D4951 (P) · D482 (ash) · ASTM D4172 Four-Ball Wear (WSD - anti-wear performance) · ASTM D2783 / D2596 (Timken OK load / Four-Ball EP) · ASTM D5182 / FZG (gear efficiency and micropitting) · ASTM Sequence VIE (fuel economy, FEI measurement) · ASTM D2272 RPVOT (oxidation stability) · D6971 RULER (AO depletion monitoring) · ASTM D6138 (DGMK micropitting) · D5185 used oil metals (Mo depletion tracking - MoS₂ tribofilm activity confirmation)
🏷
Applicable Standards
Engine oils: ILSAC GF-6A/GF-6B · API SP/SN+ · ACEA C1 (MoDTC preferred) / C2/C3/C5 (MoDTP OK) · API CK-4/FA-4 · ACEA E6/E9 · Toyota 0W-20 · Honda GN · Mercedes-Benz 229.71 · Gear oils: AGMA 9005-F16 · DIN 51517-3 CLP · ISO 12925-1 · Hydraulic: DIN 51524-2/3 · Denison HF-0/2 · Parker Hannifin HF-0 · ISO 4406 · Aviation: SAE J1966 · MIL-W-6082 · Metalworking: ISO 6743-7 MH (neat cutting oils)
✅
Regulatory & Compliance
CAS 9006-98-0 · EINECS registered · REACH compliant · TSCA listed · ⚠ Contains Mo, P, S - contributes to oil SAPS; calculate P/S/ash contribution using treat rate × content% · FP ≥150°C - non-flammable by GHS (FP >60°C); no ADR Class 3 restrictions · GHS SDS: GHS08 (Mo compounds - potential health hazard if ingested; skin/eye irritant; standard industrial PPE: gloves, goggles, ventilation; avoid generating aerosols/mist during handling) · Not food-grade · Shelf life 24 months sealed at 0–40°C · REACH SVHC: no currently listed SVHC at this CAS
🔗
Related Products - Full Additive Stack
Friction Modifiers: MoDTP CAS 9006-98-0 ✅ (this) · MoDTC (P-free, ACEA C1 preferred)  →  Anti-Wear/AO Series ✅: Primary ZDDP · C8 Primary ZDDP · Hybrid ZDDP · Secondary-Primary Blend ZDDP  →  Phenolic AO ✅: BHT · DTBP · HP-136/L01/L57  →  Amine AO ✅: Alkylated DPA · Nonylated DPA (NDPA)

MoDTP · CAS 9006-98-0 · Mo 5–10% · FM + AW + AO · MoS₂ Tribofilm · FP ≥150°C · 200 kg Drum / IBC / ISO Tank · Contains P & S · COA/TDS/SDS · 24-Month Shelf Life

Request Pricing, SAPS Calculation Sheet & Technical Support

Specify application, target Mo% content, ACEA/API specification (determines SAPS budget and whether MoDTP or MoDTC is preferred), and required treat rate. Sinolook provides: per-lot COA with Mo ICP data; SAPS contribution calculation sheet (P/S/ash impact at specified treat rate); formulation guidance for MoDTP + ZDDP + amine AO + phenolic ester four-component stack. Samples (100–500 mL) available for formulation and Sequence VIE screening trials.

Phone / WeChat
+86 134 0071 5622
WhatsApp
+86 181 5036 2095

Friction Modifiers Series:

MoDTP CAS 9006-98-0 ✅ (this) · MoDTC (P-free)  →  ZDDP AW/AO Series ✅ · Phenolic AO Series ✅ · Amine AO Series ✅

Hot Tags: modtp, China modtp manufacturers, suppliers, modtc oil additive

Send Inquiry