MPD Molecular Structure, Formula and Diol Comparison: 2-Methyl-1,3-Propanediol vs NPG, 1,3-PDO and Related Diols

Apr 07, 2026

Leave a message

MPD · CAS 2163-42-0 · Molecular Structure · Diol Comparison · NPG · 1,3-PDO

MPD Molecular Structure, Formula & Diol Comparison:
2-Methyl-1,3-Propanediol vs NPG, 1,3-PDO & Related Diols

C₂ᵥ geometry · β-methyl effect · Hydrogen bonding · Polymer chain architecture · Structural comparison series

🔗 View MPD Product Page

🔬 1. Molecular Formula & Structural Representation

MPD's molecular formula C₄H₁₀O₂ is shared with 1,4-butanediol (1,4-BDO) - the two are structural isomers with identical atomic composition but fundamentally different connectivity and three-dimensional geometry. The distinction lies in where the branching occurs and how the hydroxyl groups are positioned relative to the carbon backbone.

📐 MPD - Four Representations of the Same Molecule

Molecular Formula
C₄H₁₀O₂
MW = 90.12 g/mol
Condensed Structural Formula
HOCH₂CH(CH₃)CH₂OH
Linear backbone with branch at C2
SMILES Notation
OCC(C)CO
PubChem canonical SMILES
IUPAC Name
2-Methylpropane-
1,3-diol
Systematic name (IUPAC 2013 rec.)

Expanded Structural Diagram - Atom Connectivity

HO - CH₂ - C - CH₂ - OH
|
CH₃
C1 (–CH₂OH)  ·  C2 (–CH–, quaternary centre)  ·  C3 (–CH₂OH)  ·  C2-methyl branch

📐 2. 3D Geometry & Conformational Flexibility

The carbon skeleton of MPD is a short, three-atom chain (C1–C2–C3) with two primary hydroxymethyl groups flanking a central methine carbon that carries the methyl substituent. The geometry at C2 is tetrahedral (sp³ hybridised), creating a branched but compact molecule.

🔩 Backbone Geometry
  • C–C–C bond angle: ~111° at C2 (tetrahedral; slightly wider than ideal 109.5° due to methyl steric interaction)
  • C–C bond lengths: 1.52–1.54 Å (standard sp³–sp³ C–C)
  • C–O bond lengths: ~1.43 Å (primary C–OH)
  • O–H bond: ~0.96 Å
  • C2 is a chiral centre - MPD is a racemate in commercial production (R and S enantiomers present in equal amounts)
🔄 Conformational Behaviour
  • Free rotation around all C–C and C–O bonds at ambient temperature
  • Most stable conformer: gauche arrangement of the two hydroxymethyl arms (minimises steric repulsion with methyl branch)
  • In the condensed phase, intramolecular H-bonding competes with intermolecular H-bonding - MPD forms dimers and small oligomeric H-bond clusters in liquid state
  • Conformational flexibility is key to low crystallinity in derived polyesters
⚖️ Chirality Note

C2 bears four different substituents: –CH₂OH (C1), –CH₃, –CH₂OH (C3), and –H. However, because C1 and C3 bear identical –CH₂OH groups in the parent molecule, C2 is a pseudoasymmetric centre in the absence of further substitution. In practice, commercial MPD is an achiral molecule - the two –CH₂OH arms are equivalent, making it meso-like in isolation. In polymer chains, the structural environment at C2 becomes asymmetric, contributing to chain irregularity that suppresses crystallinity.

🎯 3. The β-Methyl Effect: Structural Origins of MPD's Performance

The single most important structural feature of MPD is its β-methyl substituent - a methyl group at the carbon beta to both hydroxyl groups. This one modification to the linear 1,3-propanediol backbone propagates through the material properties of the monomer and through the polymer chains it builds. The table below maps each structural consequence to its practical performance outcome.

Structural Feature Mechanism Property Effect in Monomer Property Effect in Polymer
β-Methyl branch at C2 Creates steric asymmetry in the backbone; disrupts regular intermolecular packing Low melting point (−91 °C); remains liquid at all normal temperatures Reduced crystallinity; lower Tg; improved flexibility and cold-crack resistance
Two primary –CH₂OH groups Terminal position minimises steric hindrance around reactive OH; both groups equally accessible High reactivity with acids, isocyanates; complete condensation in polyester synthesis Predictable degree of polymerisation; linear chain architecture; controlled molecular weight build-up
Methyl steric protection of backbone Methyl group partially shields adjacent ester/urethane linkages from nucleophilic attack (hydrolysis) No direct effect on monomer Improved hydrolytic stability; better moisture and weathering resistance vs linear diol analogues
Asymmetric backbone + H-bond geometry Methyl branch prevents the close, regular packing that maximises H-bond alignment in linear diols Lower viscosity (~80 mPa·s) vs linear analogues; easier processing Polymer chains pack less regularly → amorphous or low-crystallinity morphology
Moderate hydrophobicity increase Methyl group adds a small nonpolar contribution; slightly increases log P vs 1,3-PDO Slight reduction in hygroscopicity vs linear PDO; maintains full water miscibility Polymer shows slightly reduced water uptake and better water resistance than PDO-based analogues

🔼 The Methyl Increment: Adding Each CH₃ Group Changes Everything

1,3-PDO (0 methyls)
HO-CH₂-CH₂-CH₂-OH
  • Linear; fully symmetric
  • mp −27 °C (liquid)
  • Higher viscosity ~56 mPa·s
  • Lower Tg in polyesters
  • Higher water uptake
+CH₃ →
MPD (1 methyl at β) ⭐
HO-CH₂-CH(CH₃)-CH₂-OH
  • Branched; asymmetric
  • mp −91 °C (liquid)
  • Lower viscosity ~82 mPa·s
  • Moderate Tg
  • Good hydrolytic stability
+CH₃ →
NPG (2 gem-methyls)
HO-CH₂-C(CH₃)₂-CH₂-OH
  • Heavily branched; symmetric
  • mp +124 °C (solid!)
  • N/A viscosity (melt processing)
  • Higher Tg
  • Excellent hydrolytic stability

💡 Note the non-monotonic melting point trend: 1 methyl drops mp from −27 °C to −91 °C (more asymmetric = less crystalline); 2 gem-methyls bring mp back to +124 °C (neopentyl geometry creates its own strong crystal packing). This is a classic demonstration of the relationship between molecular symmetry and melting behaviour.

🔗 4. Hydrogen-Bonding Network & Liquid Properties

Like all diols, MPD participates in an extensive intermolecular hydrogen-bond network in the liquid phase. Each molecule can simultaneously donate two H-bonds (via O–H groups) and accept two (via O lone pairs), creating a network of up to four H-bonds per molecule. This network determines viscosity, boiling point, and solubility behaviour.

💧 H-Bond Parameters for MPD
H-bond donors per molecule 2 (both O–H)
H-bond acceptors per molecule 2 (both O lone pairs)
Max H-bonds per molecule 4
O–H···O bond strength ~20–25 kJ/mol (typical aliphatic diol)
Hansen δh (MPa½) ~21.0
Effect on boiling point BP 212 °C (vs 82 °C for n-butanol, same MW class)
⚖️ How the Methyl Branch Modifies H-Bonding

In linear 1,3-propanediol, the two –OH groups can adopt a conformation that allows relatively efficient intermolecular H-bond alignment, contributing to a higher liquid viscosity per mole than MPD. In MPD, the methyl branch:

  1. Prevents the close approach of neighbouring molecules needed for the most stable H-bond geometry
  2. Reduces the coordination number of the H-bond network
  3. Results in a somewhat less ordered liquid structure
  4. Net effect: slightly lower viscosity than 1,3-PDO despite higher MW

⚖️ 5. MPD vs 1,3-Propanediol: One Methyl Group Makes the Difference

1,3-Propanediol (1,3-PDO, CAS 504-63-2) is the linear parent compound from which MPD differs by a single β-methyl substituent. This structural relationship makes them closely related in reactivity but divergent in several important properties. The comparison is particularly relevant for formulators choosing between the two in polyester or PU applications.

Property / Criterion MPD (2-methyl-1,3-PDO) 1,3-Propanediol (linear)
Molecular formula C₄H₁₀O₂ (MW 90.12) C₃H₈O₂ (MW 76.09)
Melting point −91 °C ✅ (lower - less crystalline) −27 °C
Boiling point 212 °C 214 °C
Viscosity (25 °C) ~82 mPa·s ~56 mPa·s (lower - more linear packing)
OH value (mg KOH/g) ~1,220 ~1,475 (higher - lower MW per OH)
Polyester Tg Moderate; flexible chains Lower Tg (more flexible; more hygroscopic)
Hydrolytic stability (polyester) Better - methyl branch shields ester Lower - unprotected ester linkages
Water uptake in derived polymer Lower - less hydrophilic backbone Higher - more hydrophilic (shorter backbone)
Cosmetic/personal care use ✅ INCI approved; widely used ✅ INCI approved; widely used (bio-PDO premium)
Typical applications Flexible PU, coatings, plasticisers, personal care PTT polyester (Dupont Susterra/bio-PDO), personal care, industrial

💡 When to choose MPD over 1,3-PDO: Where hydrolytic stability and low water uptake of the derived polymer are important (coatings, PU in humid environments), MPD's β-methyl protection is valuable. Where the bio-derived "natural" provenance of DuPont's Susterra 1,3-PDO is important for marketing (natural cosmetics, bio-based polymers), 1,3-PDO has a branding advantage. The structural performance tradeoffs are modest - both are flexible, primary-OH diols with similar polyester Tg profiles.

⚖️ 6. MPD vs Neopentyl Glycol: β-Methyl vs gem-Dimethyl

Neopentyl glycol (NPG, 2,2-dimethyl-1,3-propanediol, CAS 126-30-7) is structurally the closest analogue to MPD - and the most commercially significant alternative. The only structural difference is that NPG has two methyl groups at C2 (gem-dimethyl, neopentyl arrangement) versus MPD's one. This simple difference produces dramatic divergence in physical properties and polymer performance.

MPD - β-Methyl (C2 monosubstituted)
HO–CH₂–CH(CH₃)–CH₂–OH
One methyl branch · Asymmetric C2 · Lower mp (−91 °C) · Liquid at RT · Flexible polymers
NPG - gem-Dimethyl (C2 disubstituted)
HO–CH₂–C(CH₃)₂–CH₂–OH
Two gem-methyl branches · Symmetric neopentyl · mp +124 °C · Solid at RT · Stiffer polymers
Property / Performance MPD NPG
C2 substitution Monosubstituted - one CH₃ Disubstituted - two CH₃ (gem)
Molecular weight 90.12 g/mol 104.15 g/mol (+14 per extra CH₂)
Physical state at 25 °C Liquid ✅ - ready to use Solid ❌ - mp 124 °C; must be melted
Process temperature requirement Ambient - no heating needed Must heat tank/pipes to > 130 °C
Polymer Tg (in polyester) Lower - more flexible Higher - stiffer chains
Low-temperature flexibility Better - stays flexible at −40 °C Lower - more brittle at low T
Weathering / UV resistance (polyester) Good Superior ⭐ - gem-dimethyl = maximum protection
Hydrolytic stability (polyester) Good Excellent ⭐ - two methyl groups = maximum steric shielding
Hydroxyl value (mg KOH/g) ~1,220 ~1,080 (lower due to higher MW)
Cosmetic use ✅ Yes - INCI approved humectant Very limited - solid; not typically used
Best application fit Flexible coatings, PU, personal care, plasticisers Premium outdoor coatings (coil, automotive, powder), polyester for weathering-critical uses

🗺️ 7. MPD vs Other C4 & C5 Diols: Structural Family Map

MPD belongs to a family of short-chain aliphatic diols used in polymer and specialty chemical applications. Understanding how each member's structure maps to performance helps formulators navigate the diol landscape efficiently.

Diol Name CAS Structure State RT Structural Distinguishing Feature & Best Use
1,3-Propanediol 504-63-2 HO(CH₂)₃OH Liquid Linear; no branch; highest OH value; bio-derived available; PTT polyester; personal care
MPD ⭐ 2163-42-0 HOCH₂CH(CH₃)CH₂OH Liquid β-Methyl branch; lowest mp (−91 °C); liquid RT; flexible polymers; PU, coatings, personal care
NPG 126-30-7 HOCH₂C(CH₃)₂CH₂OH Solid gem-Dimethyl; max weathering resistance; outdoor coatings, powder coatings, coil coatings
1,4-Butanediol 110-63-4 HO(CH₂)₄OH Solid* Linear C4; semi-crystalline PBT polyester; PU elastomers (Spandex); PTMEG precursor
1,3-Butanediol 107-88-0 HOCH₂CH₂CH(OH)CH₃ Liquid Linear C4; secondary OH at C3; food/pharma use; personal care (skin moisturiser); ACRYLATE polyesters
2-Methyl-1,3-propyl-diol (MPPD) 76-98-2 HOCH₂C(CH₃)(C₃H₇)CH₂OH Liquid β-Methyl + β-propyl; highly branched C7 diol; meprobamate intermediate; maximum nonpolar character
2-Ethyl-1,3-hexanediol 94-96-2 Complex C8 diol Liquid Highly branched C8; mainly insect repellent and specialty plasticiser; high nonpolar character; limited water miscibility

*1,4-BDO mp 20 °C - borderline; may solidify in cold storage.

🔗 8. Structural Consequences in Polymer Chains

The structural features of MPD manifest most clearly when it is incorporated into polymer backbones as a diol monomer. The β-methyl branch creates a specific pattern of chain microstructure that distinguishes MPD-based polymers from their linear or gem-dimethyl analogues.

🎨 In Polyester Resins

When MPD condenses with a diacid to form a polyester, each MPD unit introduces a pendant methyl group into the backbone:

…–O–CH₂–CH(CH₃)–CH₂–O–CO–R–CO–…
  • Methyl groups alternate irregularly along the chain → suppresses crystallisation
  • Resulting polyester is predominantly amorphous → transparent, flexible
  • Lower Tg than NPG-based polyester of equivalent composition
  • Better film formation at low temperature in coatings applications
  • Improved adhesion to flexible substrates (plastics, textiles)
🧱 In Polyurethane Systems

As a short-chain diol extender in PU, MPD introduces a "kinked" segment into the hard-segment domain:

…–NH–CO–O–CH₂–CH(CH₃)–CH₂–O–CO–NH–…
  • Reduces hard-segment crystallinity vs 1,4-BDO extended PU
  • Lowers Tg of hard segment → softer hand, better low-T elongation
  • Improved cold-crack resistance in PU coatings for leather, textiles
  • Better hydrolytic stability than 1,4-BDO (methyl branch shields carbamate)
  • Used where flexibility and moisture resistance are simultaneously required

🔬 Chain Microstructure Comparison - Polyester Series (with adipic acid)

Diol Component Chain Microstructure Character Crystallinity Expected Tg (MPa·adipate) Typical Application
1,4-BDO Regular, linear repeat unit Semi-crystalline to crystalline −50 to −35 °C PBT; PU elastomers
1,3-PDO Regular, slightly shorter repeat unit Low to moderate −55 to −45 °C PTT; flexible PU
MPD ⭐ Irregular - pendant methyl creates structural disorder Amorphous (low) −45 to −30 °C Flexible coatings; PU for textiles
NPG Symmetric gem-dimethyl; compact globular units Amorphous (very low) −15 to 0 °C Outdoor coatings; powder coatings

 

❓ 9. Frequently Asked Questions

Q1: What is the structural formula of 2-methyl-1,3-propanediol?

The structural formula of MPD is HOCH₂CH(CH₃)CH₂OH, representing a three-carbon backbone with hydroxymethyl groups at both ends (C1 and C3) and a methyl branch at C2. The molecular formula is C₄H₁₀O₂ (MW 90.12 g/mol). In SMILES notation: OCC(C)CO. The IUPAC name is 2-methylpropane-1,3-diol. The compound has a tetrahedral C2 centre bearing four substituents: two –CH₂OH groups, one –CH₃ group, and one –H.

Q2: Why does MPD have a much lower melting point than neopentyl glycol (NPG)?

This is one of the most instructive examples of how molecular symmetry controls crystal packing. NPG (2,2-dimethyl-1,3-propanediol) has two methyl groups in a gem arrangement at C2, creating a highly symmetric, globular "neopentyl" geometry. Despite the steric bulk, this symmetry allows NPG molecules to pack efficiently into a crystal lattice, giving it a melting point of +124 °C. MPD has only one methyl group at C2, creating a less symmetric, more irregular molecule that packs poorly in a crystal - hence its melting point is −91 °C. This counterintuitive result (one more methyl group raises melting point by 215 °C) is a classical demonstration that crystal stability depends on packing efficiency (symmetry), not solely on molecular weight or van der Waals surface area.

Q3: Is 2-methyl-1,3-propanediol the same as 2-amino-2-methyl-1,3-propanediol?

No - these are distinct compounds. 2-Methyl-1,3-propanediol (MPD, CAS 2163-42-0) has the structure HOCH₂CH(CH₃)CH₂OH: a diol with a methyl substituent at C2 and no nitrogen functionality. 2-Amino-2-methyl-1,3-propanediol (AMPD, CAS 115-69-5) has the structure HOCH₂C(NH₂)(CH₃)CH₂OH: it bears both a methyl group and an amino group at C2, making it an amino alcohol rather than a diol. AMPD is used as a biochemical buffer (Tris-like properties) and in pharmaceutical applications. MPD and AMPD share the β-methyl-1,3-propanediol scaffold but are completely different compounds with different functional groups and applications.

Q4: How does MPD's branched structure affect polymer crystallinity?

The β-methyl branch at C2 introduces structural irregularity into the polymer backbone in two ways. First, it breaks the regular translational symmetry of the repeat unit - adjacent chain segments cannot align as closely or as regularly as they could with a linear diol repeat unit. Second, in a racemic monomer (as commercial MPD is), successive C2 centres in the polymer chain alternate randomly between R and S configuration, creating a partially atactic chain microstructure (analogous to atactic polypropylene). Both effects inhibit the long-range order needed for crystallisation. The result is that MPD-based polyesters are typically amorphous or have very low crystallinity - transparent, flexible, with lower Tg than NPG-based analogues but with better flexibility than rigid, high-Tg systems like NPG-isophthalic acid polyesters.

Q5: Is MPD a chiral molecule?

In the isolated molecule, MPD's C2 centre bears four substituents: –CH₂OH (C1 side), –CH₃, –CH₂OH (C3 side), and –H. However, since the two –CH₂OH groups are identical, C2 is strictly speaking a pseudoasymmetric centre - one that would be chiral if the flanking groups were different but is not in the isolated molecule. Commercial MPD is therefore an achiral compound and is not sold as a racemate or enantiomers. When MPD is incorporated into a polymer chain where the C1 and C3 arms connect to different segments, C2 becomes a true stereocentre - and because coupling occurs statistically, the resulting polymer contains a random sequence of R and S C2 configurations (atactic), which contributes to the low crystallinity of MPD-based polymers.

Q6: What is the difference between 2-methyl-1,3-propanediol and 2-methyl-1,3-propylene glycol?

They are the same compound - two different names for CAS 2163-42-0. "2-Methyl-1,3-propanediol" is the more systematic IUPAC-aligned name and is preferred in technical and regulatory documents. "2-Methyl-1,3-propylene glycol" is an older trivial name using the glycol suffix convention. Both names appear in trade documentation, SDS, and technical literature. The abbreviations MPD and MPO are also used. Always confirm the CAS number (2163-42-0) when specifying or ordering this compound to avoid confusion with structurally similar diols.

Source 2-Methyl-1,3-Propanediol (MPD/MPO)

Contact Sinolook Chemical

Industrial & cosmetic grade MPD · Full COA · REACH OR support for EU buyers
Export to 50+ countries · No DG sea freight surcharge · Competitive pricing

📱 WhatsApp: 0086 18150362095
💬 WeChat / Tel: 0086 13400715622
✉️ Email: sales@sinolookchem.com
🔗 View MPD Product Page
Send Inquiry